Recent content by kandie

I am done!!! now it will be very easy to maintain. Just to clarify, I didn't need to add any borax or baking soda, just bleach. About $50 in bleach covered it. and I added some Stabilizer because my CYA was 0. But other than that, nothing else was added and water tests perfectly now. Also I had...

Hello again. Just wanted to give an update in case this thread ends up helping someone else. Today is day 20 since I received my TF-100 Test Kit. Getting the XL option was definately a great investment. In the 20 days, testing every two hours the first two days, then every 4 hours the next 3...

i got home today and FC was 6. I quickly added bleach according to pool math to bring it back up to 10. that should not set me back much should it? I plan to bring it up to 14 every morning now so that it can stay above 10 over the course of the day. that should be ok since that is the Mustard...

update: This morning's OCLT was 1ppm, but the pool was till cloudy, so now Day 4 of SLAM process. Kept FC at or around 10 all day. Vacuumed pool again and was able to pull up a few leaves and other particles. water is still cloudy, but FC is at SLAM level. Plan o test again before going to bed...

Progress... from green to cloudy. still slamming until its clear... there are no pucks in the shark - he is just elusive. I got him out in the end. :-) Just a note, the ladder was only in so that I could cleanup the leaves.

Day 3 of SLAM process: 7pm last night (just getting dark) FC: 11.5 CC: .5 8:30 AM (time changed - I slept too long and it was light out, but no sun due to the storm last night so I guess that makes it ok) OCLT: -1.5ppm FC: 10 CC: .5 Since 10ppm is my SLAM level, should I at this point...

Thanks Jeff! will post new numbers in the AM! thanks again everyone for your help.

Thanks Jason! Unfortunately I do not have a pressure gauge on the Intex pump, so i just have been paying attention to the flow on the return and when it seems it has slowed down, I clean it, that was every 4 hours, but with what you just stated, I'll not change it until the flow is degraded...

Since my initial problem was Algae (green water) and I have the CYA hanging in a sock and PoolSchool says to SLAM slightly above Shock level, I chose 15ppm to ensure that I was taking into account the CYA that is being added. PoolMath suggested 122oz bleach at 8.25% concentration to bring it to...

Just completed 3rd test today: 7am: FC: 9 OCLT: -4 CC: .5 added 121 oz (8.25%) bleach - should bring FC to 15 9am FC: 15 CC.5 did not add as FC is still at SLAM level - Brushed walls and vaccumed pool during 2 hour wait 11 am FC: 14 CC: .5 PH: 7.5 CYA: <20 seems higher since the dot...

SLAM process is going good - almost at 24 hours now... only loss 4ppm FC last night. brought level back up. vacuumed and brushed walls. testing every two hours now and adding more bleach as needed every two hours to keep FC level up to 12 ppm. PH seems high now, but will deal with that after the...