Recent content by Juicemann

Pool walls are in decent/good shape, but the bottom rail is rusting badly, even missing on the outside part that I can see. This past fall, I used a rust reformer on the bottom few inches of the wall and bottom rail, I plan to paint this spring. The cove is foam. I just need to get through this...

Between the wall sweat and improper ground slope(regrading today), you can see the ground rail rusted to the point of holes. I was gonna spray a rust reformer and just caulk the hole to keep water out. Then paint. Does the bottom track keep the wall from blowing out at the cove? I do have...

Do I need the “stain, rust and scale control” for closing an AGP with vinyl liner? I bought a closing kit but probably could have bought what I wanted separately. The floating pucks aren’t chlorine(may contain boric acid), no ingredient list either. Kind of a lame kit.

Slightly down and to the left. I always know where any debris collects on the floor, on the far right side away from the eye.

https://www.polywood.com/5piece-dining-set-pws171-1.html

Is the bottom support rail still visible? Slide a pice of aluminum roll flashing down into the area between the pool wall and bottom rail. You may have to clean it out real good first. 6, 8, 10 inches high are your options. I'll attach a picture of what I did.