Recent content by jsw5620

It’s probably older than that. I got it used 3-4 years ago. I had an older model one my nephew gave me before I got this one with no PSU. Thought it was junk so kept it for parts. Plugged it into the PSU and I’ll be danged if it didn’t take off across the pool and start cleaning. Hopefully it’ll...

Also only getting 26.95vdc out of PSU

I have a Dolphin Premier cleaner with a 3 prong cable. Not working this season. Moved a little bit then nothing. Should all 3 prongs on the cable have continuity for it to work? I’m only getting continuity on 2 prongs.

Thanks! Sent from my iPhone using Tapatalk

Thanks. I saw the chart and have to pool calc app on my phone. Wasn't sure if those levels between CYA levels and SLAM mattered between the SWG & NON-SWG pools. So basically, bring CYA up to 30, FC up to at least 12 instead of 30. Got it! Sent from my iPhone using Tapatalk

I've used the FC level of 30 a couple years ago, but you can tell it bleached out my liner Sent from my iPhone using Tapatalk

What's the recommended SLAM level for a CYA of 30? I forgot to mention I added the baking soda this morning to bring the TA up. Sent from my iPhone using Tapatalk

Getting my pool ready for summer. We have had a lot of rain here where I am at and I am trying to get all my levels back right. After having to drop water levels a dozen times during the rain, my levels were pretty much none. My levels are TA=40 FC=2ppm CC=1ppm pH=7.2 CYA=0 or not registering...

WHEW!!!! I've been draining the well under the pool on and off and the liner is back in place with no wrinkles. :whoot: :whoot: I guess I need to start draining the well more after it rains.

I may be wrong, but I would look for the hole somewhere around where the water level is now if the hole is in the liner.

Got the hose in it now.

I kinda figured it would go back to normal on its own, but didn't know if I should do anything in the meantime. The wrinkles are really what I am concerned about. I really would like to minimize or end up with none if at all possible. I'd hate to have a wrinkled up 4 month old liner.

Due to all of the rain tropical storm Lee has dropped, I now have water behind the liner on my walls. It doesn't appear too bad at this point. It is worse is one of the corners in the shallow end. Floors look good. It appears to start mostly at the water level and goes down about a foot below...

Re: Why the difference between FC levels here and manufactur PB told me I needed to run it at night because it is easier on the equipment so I divided it up. One thing that was a shock to me was when I called autopilot, they informed me that the SWCG needed to be calibrated about every three...