Recent content by JSpool3

"Last summer", while I was on vacation it seemed the Pop-Ups stopped working, and or the skimmer got clogged. I ended with some lines of stains going out radially from the Pop-Ups. I cannot brush them out. I have a 20 yr Pebble-Tec pool, 10K gallons, Salt Water, and I use a Pentair Chlorine...

thank you Atttech-2. Good advice. Joe

Thank you Rich. Perfect as was looking for something is a box and somewhat weatherproof.

Here is an updated diagram. Sort of miss radio shack. Jim, by chance, do you know where is best to buy a 110V relay that will switch the 24V, 1-2 amps? Be best if could take some weather, but I might be able to put it in a weatherproof box. Ideas? JSPool3

thanks Jim. Yes, agree. Need to update the drawing to clarify. The relay is a 110 VAC relay switching the 24VAC power. The Wi-FI switch, will be switching the hot side (black) of the 110 VAC. The white wire of the 110 VAC would not be switched and connect directly to the step-down...

Thank you, Jim. This is great, just what I was hoping for. Appreciate your feedback, along with the others who responded. Just to be clear, I would need to get find 110 VAC WIFI switch and have that energize a relay that would switch the 24VAC. Does anyone have a suggestion for a good outside...

Is there an electric valve actuator that can be switched easily with applying power on/off to the actuator to switch the water flow direction? I would like to control the actuator remotely from a wireless Z-Wave switch, maybe by switching on/off the 110VAC power source (or 24 volts actuator...

I was told that the Pentair SWC should only be powered when the pool pump was running. Seems there is no connection available from the Hayward SP3400VSP to indicated when the VSP pump is powered and running. You would think you could run power (or a signal) from the Hayward pump that indicated...