Recent content by Humby81

  1. H

    Rusted ledge - Recommendations?

    The ledge is made out of five 4ft metal sheets. If I stepped on one now it would probably give. The cavity is hollow a 1 or 2 feet down to where the gravel dirt starts around to the pool walls. If I put bondo on it I think it would be strong enough to walk on if I had to but normally wouldn’t...
  2. H

    Rusted ledge - Recommendations?

    The ledge in front of my cover compartment is pretty rusted. I was thinking of using bondo to fill the holes and put a primer over the whole ledge. You can see in one of the pictures part of the pool wall at top has rusted and is pulling at the coping. Would love to hear anyone thoughts or...
  3. DF667B04-C8A7-43C6-BC4D-93CDE2E711D9.jpeg

    DF667B04-C8A7-43C6-BC4D-93CDE2E711D9.jpeg

  4. 449BB548-1A2E-4357-8CD0-96A68CF1A5A1.jpeg

    449BB548-1A2E-4357-8CD0-96A68CF1A5A1.jpeg

  5. H

    Sand in pool

    Thanks for the responses. It started about two months ago. I checked the spider gasket and that looks in good shape. So it sounds like everyone agrees that it’s something with the parts inside the filter? Either the laterals aren’t in right, stand pipe cracked or not set in base...
  6. H

    Sand in pool

    Thanks. Question for the group is when sand gets worn down does it get through the filters? The sand was changed 3 years ago so I guess there is a chance it needs to be changed?
  7. H

    Sand in pool

    Yeah it’s Sand. My pool cleaner picks it up.
  8. H

    Sand in pool

    The sand was replaced about 2 years ago so put the same sand back in filter after changing the laterals.
  9. H

    Sand in pool

    A few weeks ago I changed all laterals on my Triton II sand filter since I was getting sand in my pool and a few turned out to be broken. I’m still getting sand now. Any ideas what else it could be?
  10. H

    Polaris 380 wheels stop

    After putting my pool cleaner in the water it will clean for 5 to 10 mins and then the wheels stop turning and it face plants. If I pull it up and spin the wheels it starts turning again only to stop again in 5-10 minutes. This is only the 3rd summer I’ve used it. I did just have to fix my...
  11. H

    TF-100 Cyanuric Acid Test Results

    I did the test under a can light so don't think it will be much different but I will try it out. What is a desired level for a SW pool and is lower better or worse?
  12. H

    TF-100 Cyanuric Acid Test Results

    Did this test several times inside my house with a sample from the pool. Every time the black dot never disappeared. Does this mean that I have extremely low cyanuric acid?