Recent content by Highrove101

It was the heater throwing off the salt reading. Cell is working fine and indicating properly now. Thanks again.

Thx!

My new Explorer E30 (S200) has been flawless since the fix that Marina sent me. (See earlier post in this thread) It cleans SO well. SO much better than Polaris 3900. It even climbs my stairs. I’m completely addicted to the cleanliness I never knew I was missing. I do wish I had the...

Are you supposed turn off SWG while adding salt to pool? If so, why? I saw this mentioned in this thread earlier.

Will do. Thanks!!

1.) Yes the Cell light t would correspond to the 60% setting....can’t believe I didn’t think of that. Thanks! 2.) Yes heater started at same time as heater snd pump today. 3.) can’t take pic of underside of IC40 without uninstalling it. I ordered it from ebay (allegedly new in box) and...

Two issues: 1.) IC40 is blinking for high salt level but my Taylor Kit says 3000. 2.) Cell light is intermittent. Sometimes it’s solid green but sometimes it’s just off. It is not flashing. IC40 is currently set at 60% with the pump running 8 hours per day. It’s holding FC steady at...

This might help? Solved my issues but they were slightly different. Motor disengagement procedure:

Try this, worked for me:

Ha! Exactly

Love my SWG. Once I get things dialed in my levels stay nearly perfect. Very little effort. Again, I just can’t believe the thousands of dollars I was paying for others to harm my pool. Originally I wanted NOTHING to do with pool maintenance/management. I was happy to pay so I “didn’t have...

Once my pool is dialed in I only spend a few mins once or twice a week at most. With a properly set SWG and water at TFP levels the pool is virtually on autopilot except for weekly draining of skimmer and cleaner baskets. I sometimes go two months without needing to add anything to pool. It’s...

I put two cups of 10% in the deep end. Did some skimming with net and ran my new Maytronics Explorer E30 for two hours. I figured it circulates a fair amount of water. Though I was concerned about it potentially getting exposed to localized high FC levels.

So pump is in the shop but won’t be back until Thursday. Suggestions on how to survive 2 days with no circulation, filtering, nor SWG operation?

I noticed my pump was leaking today. See video. Is this something I can fix myself? If so, how? Well, additionally, I’m having trouble posting video....guess I need help with that too. 😑