Recent content by HeneryH

I just tried to 3d print one for myself. I'll let you know how it works out. There seems to be plenty of room in the recessed area for the knot.

Thanks folks.

I've never had bubbles before but now that my IC40 SWG is running, I hear and see bubbles. Do SWG generate bubbles as part of the reaction?

Air Blower for spa jets.

http://www.saltwaterpoolandspa.com/zinc-anode.html Looks like the anode could go in that 29 horizontal prior to the heater but that might be in the way. Maybe on the riser prior to the heater to keep it out of the way if orientation doesn't matter.

There is still the original check valve on the outlet of the heater. I'll check/rebuild the flapper. Not enough exposed piping to cut it out and replace.

That has a hose bib on it. Maybe they put it in for air compressor or something for winterization. I always open the pool myself but pay to close it. I'm in freeze zone so a mistake closing could have me jack-hammering the concrete deck up.

Thanks duraleigh. Hmm, I just assumed they were sched 40 but maybe not. I'll check again. I did the check because that was what was there from the original install. That is the only reason so if it isn't adding value, I'll skip it. My kids heard I got one and are pushing me to keep it :) I...

I had to replace a 10 year old pump and multiport valve and seek your opinion on the layout before I glue it up. I am considering replacing my chlorinator with a SWG on the horizontal 32" return line after the heater. Any advice on the SWG in the 32" line? I am going to insert the check...