Recent content by FloopyDoops

Just an update, I drained the pool below the jet and saw that the gasket is disintegrating and on the bottom the pipe isn't flush against the wall of the fiberglass. This is definitely letting water escape around the fitting, rather than anything being broken inside the pipe. I put a bunch of...

That’s a really good idea. I wonder thought if the leak isn’t between the wall of the fiberglass pool and the outside of the pipe, rather than anything inside the pipe. That piece might only fix the inside?

Yea basically there is the eyeball, the round disc that holds the eyeball and has threading and then there is the actual pipe with the gasket that is stationary and that I suppose has something underground on the other side of the pool that can be tightened? That last part is where the leak is...

Hi there, I have a leak in my 12,000 gallon Fiberglass pool that’s about 40 years old. I’m losing about a half inch of water a day. I’ve done an ink leak test around the jets and found one spot where it does seem to flow underneath the jet around the rubber gasket. The rubber gasket is...

This makes so much more sense now. I didn’t even consider that there wasn’t a plug and play fix, but now I see a whole side of this I didn’t even consider. I think i’m going to go the relay way, but is there any option to just turn the SWG off and run everything else? I guess I could just unplug...

Tried to find this answer, but not seeing my exact situation. I’m switching to a salt water setup this year. I have a Pentair Superflow VS Pump, a Pentair Clean and Clear Plus 240 filter, a Pentair Intellichlor IC40, a Hayward Heatproof 140,000 BTU Heat Pump and a Pentair Intellichlor Power...