Recent content by DrPhumbles

Ok, so if I go back to 2 body mode by moving the jumper and resetting, I would still keep my filter pump plugged into the PUMP relay, then set up the Pool mode schedule for circulation and when I hit SPA I can set my Spa temp etc with nothing plugged into the SPA relay?

Right now my EasyTouch display just shows Auto, then air temp and the date/time. When I put it in single body mode, it didn't ask me to set it up as anything, the instructions said it would just change the P button to Low temp and Spa button to High Temp. Right now I have my Filter Pump plugged...

Hi Jim, I don't have pool mode in ScreenLogic, there's nothing to turn the pump on or off in the app for me. If I manually start it with the button on the control panel I can control everything with the app, but can't turn the pump off unless I physically hit the button again. Might have to call...

I don't have an option for pool mode currently. This is for a spa only, there is no pool, so my system is set up for Single Body operation (It's dual body by default for people who have a pool and spa, changed by moving a jumper on the board and resetting). For my system, on my wired Indoor...

Got everything hooked back up, and the jets do seem to work pretty well without the Booster, not sure if I'll add a 1hp to replace the 2hp or not just in case since it's already plumbed...if I don't I'll have to cap the line because it doesn't have a one way valve. I do have a ScreenLogic...

No, I removed the old Compool CP3810 indoor control panel and installed the EasyTouch Indoor Control Panel 8. I hadn't thought you could just shove more wires into the COM port, but guess I was wrong. I had thought there were 2 COM ports because there's the 4 screw wire connector, and the phone...

Hey Jim, Do you know if I'm able to hook more than one thing up to the COM port? I have my Indoor Control Panel hooked up to the screw COM port currently. Initially, as it's phone wire with RJ11 connections, I cut off the RJ11 connector and wired it to the Indoor Control Panel correctly, then...

Ok thanks, I plugged into the pump port, looks like I don’t need to use the spa connection at all. It also had me move the j25 jumper and do a factory reset to put it in single body mode. Hopefully it all works as intended once I get my filter up and running. Thanks guys

Ok, I installed my EasyTouch Upgrade for my Compool and have a couple questions. One is, my filter pump was plugged into a jumper marked Filter on the Compool, but the new card doesn't have anything with that name. Options are Pump or Spa, does it matter which I plug the Filter pump into...

I haven't tried the jets out yet, I'm still repairing my DE filter so that I can run the spa until all my materials get here, and then I have to work out a good time for my cousin who is very handy with pool plumbing and electrical to come help me do things right. Once I minimize the leaks on...

Thanks a lot, explains why my friends with only pools thought my pumps were overpowered, since they're not used to spa setups. Went with the Intelliflo3 3hp.