Recent content by drb

Trees are about 5 years old and look as good now as they did new. I take the heads only off every season end so they don't have to deal with the weight of the snow.

Well I went with the trees from Tropical Expression. I thought the trees from Oasis look better but were 2 times the cost. Also Oasis used real palm bark screwed to the trunck, I thought this might not hold up as good in harh winter weather. So I got [2] trees that I am very happy with, here are...

Tanks for the quick reply. I thought maybe the AP always showed your setting [mine @ 50%] and did the temp adjustment without showing the rate. What seemed strange to me was that the warmer water tep showed a lower chorine rate. I thought it shouldbe the other way. Also I raised the power...

This is the first season I am using a Autopilot Dig 220 with a SC36 cell and I am not sure if it is operating correctly. I started with FC of 4ppm and it is dropping. I set it at 50% per instructions and sometimes if I look at the display it shows different valves. Once it read 12 another time...

So how are these holding up? I am thinking of getting 1 or 2 and can't decide which ones. I live in Buffalo and think I may like to take apart and store inside for the winter. Is that something easy to do with these tress? Just by looking I like the ones on the Oassis site, but they are by far...

Need to update my sig, that is my old equipment. End of season did a complete rebuilt of pool. I now have a 2-speed 1.5hp tristar with the .75 impeller. Daren

I have finished exchanging the 1.5 hp impeller with a .75 one. I can 't test to spring but expect all will be well. Thanks for every bodies help. The reason for this change, besides that the flow was too great, was to save as much energy as possible. How does running a 1.5hp equal running a...

I have a Polaris 9300 I just got end of this years season. Pool wasn't finished till early Nov and it appeared to work ok in 45 degree water. Daren

I have 230 running out of my main electrical panel to a outside sub-panel for the pool. I know that different towns/cities may have different codes but where is the preferred location for the GFI circuit breaker for pump? I have a GFI CB in the main panel inside the house, one electrian said...

Not sure yet. I will use the dig-220 to control high/low pump speed tru. Yes, it's going from breaker to timer to swg to pump. I wanted timer first to act as a failsafe so swg can't produce chlorine when pump is not running. For ease of wiring I wanted to use 12 or 14 awg wire which is possible.

230v or 240v, 1.5 amp is nothing I will be able to use 12 or even 14 awg wiring if I choose. I am sure that a timer will not add to the amp draw, but I better ask just because I have been wrong plenty of times before. It is a Intermatic mechanical timer [T104] and I assume it has little or no...

How much amp draw needs to be added for the AP Digg-220? I don't see anything in the instructions about it. I like to keep the smallest gauge wire possible to keep the wiring more manageable in the enclosure. Thanks Daren

Great thanks. Now the very last question. I have 1.5 Hp that am putting the .75 impeller on. Now let's say in 10 years the motor needs replacing, can I put a 1hp motor on? .75hp is not available in a 2 speed Daren