Recent content by divingkevin

The 1 1/2” line is off the bottom of the skimmer box and runs outside the pool deck then up and out of the ground with a 90 at the desired water level. I was thinking g of digging down and cutting the pipe to install the autofill housing. Would that work and if so what autofill do you recommend?

If the line is straight out of the skimmer to outside the pool deck can I add the auto fill outside in the same manner as if it was next to the pool?

I have a 1 1/2” line that runs 20’ to the outside of my deck as an overflow. I believe this comes from a port on the skimmer box. Is it possible to use this 1 1/2” pipe outside the deck to install an Autofill from a plumbed water supply line?

I am in the middle of a renovation. I am being told the existing pebble is hollow throughout the pool and needs chipped off to apply a new pebble finish. I am wondering what is an average expense for the chipping of the old pebble? I want to make sure when I get the quote it is inline with an...

I use the iPhone mobile app for my screen logic connect and screen logic configure. I have an iMac that is running on Catalina so screen logic is not compatible with it that I am aware of:-(. both lights are set on different aux circuits and transformers. Also in configure I have tried them both...

They do not share the same transformer. Both I depend sent transformers and relays. The on off for the lights show separate in screen logic but there is only one color option in the screen logic menu. When I turn one light on and then select a color for that light the other light relay energizes...

I have 2 intellibrite (1 pool 1 spa) both to 1 circuit and I can trigger that relay. I just added a magic bowl with the fire x light. I have that on a circuit and set as an intellibrite since there is no fire option to select. I want to be able to control the color on each circuit separately...