Recent content by cuckoosit

  1. C

    pump speed for pool cleaner

    Thank you
  2. C

    pump speed for pool cleaner

    I have Jandy VS (variable speed pump). What speed should I set the pump to run the Polaris 280 cleaner with booster pump?. It is currently set at 3450 RPM. Thank you
  3. C

    Pool pump time and speed during winter

    Thank you all for your input.
  4. C

    Pool pump time and speed during winter

    I have a Jandy variable speed pump. Right now it is running at 3000rpm 8am to 8pm and 1700rpm 8pm to 8am. The pool guy set it up for the summer. In winter when I am not using the pool, what is the optimal pump run time and speed for day and night. I have SWG, so I need to adjust its % too...
  5. C

    Pool Filter/Pump don't turn on

    Thank you
  6. C

    Pool Filter/Pump don't turn on

    Since I have always relied on Salt water chlorine generator, I don't know how to increase the chlorine level in the pool manually.
  7. C

    Pool Filter/Pump don't turn on

    I have turned the breaker on and off few times, still won't turn the pump on. When I press the test button, the breaker does not turn off. Does it mean it is a faulty breaker?
  8. C

    Pool Filter/Pump don't turn on

    I have all Jandy/Zodiac pool equipment. I cannot turn the pool pump/filter on despite the Aguapure equipment box is turned on. I can turn the pool light on, so the Aquapure control box is functional. On remote control when you turn the pool pump/filter on, it goes from off to on but a sign comes...
  9. C

    No flow through pumping station

    Jason, the lid was not fully aligned and likely not sealed. After realigning it, now flow has restored and everything is working fine. I really appreciate your help.
  10. C

    No flow through pumping station

    Yes the lid is on.I ran the pump for few minutes. Where is the drain plugs located?
  11. C

    No flow through pumping station

    No the pump basket shows water only in the bottom
  12. C

    No flow through pumping station

    No water flow through the pumping station I have jandy aqualink pump system.. After I clean the pump basket and turn the system on again. No flow sign coming at aqualink panel and no water coming through pool returns. - - - Updated - - - Yes pump is running
  13. C

    No flow through pumping station

    I turned the Aqualink off to service mode to clean the pump basket on jandy pool pump. When I turned the Aqualink on to auto mode and turned the pump on. No flow sign is coming on the panel and no water is flowing through pool returns or pump or aquapure. I forgot to open the water valves to...
  14. C

    Jandy gas heater offline

    How you use heater manually
  15. C

    Jandy gas heater offline

    My jandy/zodiac gas heater after working for few hours this morning suddenly stopped working. On zodiac remote control it says heater offline, although on heater panel it says SPA TSTAT ENABLED.
See more
Top Bottom
Back