Recent content by crockettjeanne

Hello, current readings for gunnite pool… FC 5 Ph 7.8 Cya 60 Salt 3300 CH 250 Temp 76 Water sparkling and clear Pool math says to add 17 lbs of calcium chloride to raise CH to 350. What is the best process to add and will I raise the salt too high? Will I effect the other levels that I...

The ribbon was secure. But the reboot corrected the issue. Shows correctly now. Thanks for the help!

This is what the app shows...

Hi All, Have you ever seen this? I cannot find this in any documents or in the forum. Just replaced the salt cell and when I look on the app all is good. Just have this on the outside unit. Do I need to reset or something I missed?

Did I miss anything? And the pool itself does not smell like chlorine, only smelled it on clothes and skin after swimming and this is not the norm. FC 7.5 CC 0 CYA 40 PH 7.2 TA 50 CH 350 Salt 3200 pool temp 91 SWCG at now 50% (was 100% as prior recommendation was to increase chlorine) VS...

These are results from my TFP pool kit. I did the ppm and FC is 7.5 and CC is 0. Doesn't that mean Total Chlorine is 7.5?

I watched TFPs YouTube video on the relationship between FC and CYA and I think I may be looking at this wrong. Before recent chemical additions I did not have significant chlorine loss per day. Usually run SWCG at 50/60 % and run pump 8 hours a day and still keep chlorine at 2 or 3 and I have...

Ok, so I am safe to continue to add stabilizer to increase CYA to 70?

This morning: TC = 5+ PH = 7.2 CH = 325 TA = did not retest yet Salt = 3200 (did not add the salt and still got this level. CYA = have not retested, but stopped adding after 4lbs dry stabilizer as it seems to be raising my salt level The water still clear, Yay! Still see the black spots, but...

I am glad I waited on the salt. Is it the calcium that is causing the increase in ppm?

Thanks! Water not cloudy, but I do have a few black spots I had to rub the chlorine puck on to "erase".