Recent content by benz55

Hello, Can I connect the spa and pool light together to the same 12v transformer as long as the transformer is rated for the proper wattage? I’m planning on using 2 -40 watt led bulbs , use the existing housing and wire and connected them both to one 100 watt transformer. I’m ok with both lights...

This is the valve I want to install. the previous valve was a 180

Hello, I had a pipe break at the check valve so I need to replace it. From the photo the red arrows are the water flow into the spa through a check valve. Can I put one of those right angle check valves in the circled spot? I see the jandy valve instructions say that water flow will need to be...

Auqualink RS6

Hello, I have 120V lighting for my pool and spa. I have a few questions regarding how to convert to 12V for safety reasons. I do not have a transformer. 1) The spa and pool lights are turned on and off from my controller separately, Does this mean I would need 2 transformers to continue to be...

Here’s another photo. The output from the filter is feeding to a tee at the heater And the part in question is going around the filter and capped

Yes it’s a water PVC line teed off the return from the heater going to some kind of valve and then capped off. Wondering if I can just remove it but no clue what it was used for before or if it has some purpose.

Hello, does anyone know why I need this part of the plumbing coming off the heater? See red lines. Is capped off just after the wide piece. Thanks

Hello, What do I use for testing SLAM levels? I cant seem to find a comparator that goes up that high. The one I have in my Taylor 2006 kit only goes to 5. Am I looking at something wrong?