Recent content by beanerz

  1. B

    Jandy Aquapure Question

    mknauss Wanted to say thank you for all your help. As it turns out, my SWG was kaput. That said, grape ape was right. I paid $125 for a guy to come out, look at it, no electrical testing, and tell me they go bad after 3-4 years. He added 4 lbs of stabilizer to get my CYA up, and charged me $60...
  2. B

    Jandy Aquapure Question

    Well, took in a water sample to test. CYA 10 PH - 7.2 (After not adding muriatic acid for a week) FC and CC both measured at 0 there. It's not making chlorine for whatever reason. Their salt measurement was 2250, whereas my measurement is 3100 I think I'm in over my head at this point and...
  3. B

    Jandy Aquapure Question

    Thank you for all the help. Headed to pool store for some CYA and bleach!
  4. B

    Jandy Aquapure Question

    Error code before cleaning cellwas 121. No error code now, but have not turned boost on. When adding powder to 10 ml water sample for FC test, it goes from clear to cloudy pink. Adding chemical brings it to cloudy white. after 3 drops. Will slamming pool increase CYA level, or do I need to add...
  5. B

    Jandy Aquapure Question

    the SWCG was installed with the pool in the spring of 2015. I feel stupid asking, but how do I get the diagnostics from the cell? I have a TF-100 test kit, but it's 2 years old, so readings could be suspect. PH looks to be about 7.1, a little low. FC reading at 1.5, but combined chlorine...
  6. B

    Jandy Aquapure Question

    Hello all I have a Jandy Aquapure SWG and I think it may be coming to an end. My question is, will it just quit all at once, or do they slowly lose their effectiveness? It's just over 3 years old. The sensor was replaced last summer (warranty). Tuesday morning, after cleaning filters and...
  7. B

    Jandy Aquapure 1400

    In the end, it was just that jbizzle. I cut the pipe to the left, added in a collar, and now it fits perfectly.
  8. B

    Jandy Aquapure 1400

    I took off the salt cell for the first time today to clean it. I cleaned it according to manufacturer specs. When I went back to install it, I can slide it down between the two pipe ends with moderate force, but the space is so tight, it's pushing the rubber o-rings out of the pipe ends where...
  9. B

    New Pool Owner/SWG Question

    Hi all As a new pool owner, having an issue. Pool has been up and running for 2 months now, but my SWG is not producing enough chlorine. I took a sample to the pool store around the corner, NPS Pool Supply which I am told is the best option in Las Vegas. After testing, they told me all the...
  10. B

    beanerz from Las Vegas

    Hello all! I am a Las Vegas native and a first time pool owner as of this spring. Family loving pool life so far and looking forward to tapping into the knowledge of everyone here!