You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
-
The ETI heater design is simply the same heating design as a condensing water heater - the hot exhaust combustion gas is used to preheat...
-
@1poolman1 has a lot of experience in this area and the one thing he will reiterate over and over again is that he WILL NOT sell a...
-
What is the size of the gas line to the heater and the length?
If the gas line is too small for low pressure then they upgrade the gas...
-
If you have 1" gas line 5' long you should be fine.
If gas company needs to upgrade your service to high pressure they can put one...
-
There are two versions of the PoolMath App - one free and one you pay an annual subscription for. The free version of the App is very...
-
No. There's no change in pressure, only in the maximum flow rate through the meter.
-
The gas appliances in your home only need a few tens of CFMs. If you added up all appliances together, they probably wouldn’t needs...
-
Your gas service is undersized. You have a 250CFM gas meter trying to feed a heater that requires 400CFM.
Your heater gets insufficient...
-
Human beings simply aren’t “conductive enough” to be worried about electrocution by low voltage power. As long as the high voltage...
-
I would consider a DIN rail mounted box and run the low voltage through conduit to the pool. Very easy to mount and there are many...
-
That would still be a 120V high voltage appliance and it would have to follow pool building code rules which would most likely mean that...
-
You can get a pool code power transformer that will convert 120VAC to 12/13/14 VAC as those transformers are designed with isolated...
-
Also, this sounds like a project that @Dirk would love to comment on …
-
You can probably just use any standard AC/DC converter and then add it to an environmental enclosure that mounts on a wall. They don’t...
-
What’s the application?
-
Loading…
-
Loading…
-
Loading…
-
Loading…