Latest activity Postings Media Albums About
-
-
Jimrahbe replied to the thread Help. Main bottom drain will not drain.C-Less, Bottom "drains" don't actually drain anything. :mrgreen: More than likely the drain in the bottom of your pool is connected... -
Jimrahbe replied to the thread Bubbles! - Chems doing their THANG or.... ????.Meg, We do not recommend any of the pool store "Magic" potions that have been added to your pool. They are basically made to make your...
-
Jimrahbe replied to the thread New here with new problem.58, Welcome to TFP.. You don't have a plaster problem, you have water problem.. The main problem is that your idea of "chemical...
-
Jimrahbe reacted to gullzway's post in the thread Dolphin Diagnostics (2008) wiring repair help. with
Like.
Thanks. Mine doesn't have a remote, just the Power pack that has an On/Off switch. Not sure why there's a red wire from the circuit... -
Check the upper right VALVES circuit breaker.
-
Jimrahbe replied to the thread Intellivalves not lighting up.Brian, Besides getting rid of the rabbits, you can just splice the cables back together... Thanks, Jim R.
-
Jimrahbe replied to the thread Need confirmation on my wiring for IC40.Dan, If you are happy with what you have, you will not have any issues.. That said, why are your running your pump so fast? I run...
-
Jimrahbe replied to the thread Bubbles! - Chems doing their THANG or.... ????.Meg, Tell us exactly what 'chemicals' you have been adding to your pool... :scratch: Looks pretty soapy to me too.. Thanks, Jim R.
-
Jimrahbe reacted to Newdude's post in the thread Bubbles! - Chems doing their THANG or.... ???? with Like.
Not likely with cloudy water and foaming. Although the foam looks soapy and not pond scum-y to me. How are you chlorinating ?
-
Jimrahbe replied to the thread Need confirmation on my wiring for IC40.Dan, Just so you know... The pump/filter relay will not close unless the system is in AUTO and either the pool mode or the spa mode...
-
Jimrahbe replied to the thread Need confirmation on my wiring for IC40.Dan, You have done your homework well!!! :goodjob: You are correct, the cell should be wired to the load side of the pump filter...
-
Jimrahbe replied to the thread Mysterious pipe.If you have a vinyl pool, it is most likely a well point... A way to drain ground water that might push your liner away for the pool...
-
Jimrahbe replied to the thread New VSP won't Pull Through Skimmers.O, Weir doors are what make skimmers...... actually "Skim" the surface debris. :mrgreen: Without operating weir doors your skimmers...
-
Jimrahbe replied to the thread New VSP won't Pull Through Skimmers.O, Show us some pics of the equipment pad.. Maybe one of us can spot something.. Just to be clear about weir doors.. They not only...
-
Jimrahbe replied to the thread Pentair IC40; No lights on salt cell.Marty, Sorry, I missed that.. :( After your replaced the Surge card, did you power up the EasyTouch, with the SWCG disconnected, or...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…