Latest activity Postings Media Albums About
-
-
mknauss replied to the thread Featured Multiple SLAM attempts.Limit the main drain to no more than 10% open. -
mknauss replied to the thread Featured Multiple SLAM attempts.Filters filter better at low flow rates. At the high rpm with that pump you are blowing material through that sand filter.
-
mknauss replied to the thread Algae stains remain while emptying pool.FYI -- In San Diego they use primarily Colorado River water. They also have high evaporation. So the high 'TDS' is salt and calcium.
-
mknauss replied to the thread Could this just be a stain???.Water may not have metal in it. The metal is deposited on your pool surface.
-
well guys, 24 hours of the polyfill bucket method and this thing is a beaut, perfectly clear and blue, all the chemicals Are pretty much...
-
mknauss replied to the thread Could this just be a stain???.Looks like copper. See Stains in Your Pool
-
mknauss replied to the thread Stumped with Air Bubbles from Return Jets.That eliminates the hydrogen if the SWCG is not operating.
-
mknauss replied to the thread Stumped with Air Bubbles from Return Jets.Look at the pump drain plug orings and be sure to use pool lube on them. Also try varying the rpm on the pump to see if it changes. Be...
-
mknauss replied to the thread Featured Is a pool refill best option in my case?.Home Depot rents high speed sump pumps.
-
mknauss replied to the thread Featured Is a pool refill best option in my case?.They will not do that. They will nuke it to very high FC and say that is good. The algae will be back. First you must kill off the...
-
mknauss replied to the thread New guy on TFP.Welcome to the forum! I suggest you read through Pool Care Basics - Trouble Free Pool and even look at a few of our videos TFP-TV -...
-
mknauss reacted to PoolStored's post in the thread Water Softener and Salt Chlorine Generators with
Like.
Yes, many here have installed softeners FOR their pool. No. You likely will not be able to fill the pool with water from a softener... -
mknauss replied to the thread Water Softener and Salt Chlorine Generators.You have a great set up. No issue with anything. Continue to use the softened water for make up water. Assuming your pool is plaster...
-
mknauss replied to the thread Featured Multiple SLAM attempts.You should also try to run the pump at a lower rpm. Without a heater I suggest you try 1200 rpm and see if that skims the surface of the...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…