Latest activity Postings Media About
-
-
ajw22 replied to the thread When Spa turned on Air blower does not come on. When the jet is turned on the Air Blower is on..Jumper a wire from AUX1-A to AUX2-A Move blower black wire from AUX1-B to AUX2-B Change configuration for blower on AUX2 Done. -
ajw22 replied to the thread When Spa turned on Air blower does not come on. When the jet is turned on the Air Blower is on..i cannot see where E, F, and Black B connect to now. AUX1 has a Blue wire and two red wires connected to the load screws. Where do the...
-
ajw22 replied to the thread Aqua Trol RJ - No Flow Light.Is the internal timer on? You can play around with the system and see what it will do.
-
ajw22 replied to the thread What is this stuff my vacuum keeps sucking up?.You are in Queens? I am surprised your water temperature is only about 50. My pool is up to 64 across the Hudson from you.
-
ajw22 replied to the thread Let’s see your water after removing winter cover!! *PICS THREAD*.At opening April 16th…
-
-
-
ajw22 replied to the thread What is this stuff my vacuum keeps sucking up?.CSI below -0.6 can cause etching of the plaster. If you play what if with Pool Math and see how your CSI increases with adding calcium...
-
ajw22 replied to the thread Pool lost water over winter.Welcome to TFP. Before you add water into the pool note the water level in the pool. It is likely the leak is just above the water...
-
ajw22 replied to the thread New pool start up.https://www.troublefreepool.com/wiki/index.php?title=Just_Filled_Your_Pool_with_Water%3F_Here%27s_What_To_Do_Next
-
ajw22 replied to the thread What is this stuff my vacuum keeps sucking up?.Are you using ? Use it to calculate your CSI. What is your water temperature? Yes, you need to raise your calcium to around 350ppm...
-
ajw22 replied to the thread A little overwhelmed with pool levels.Welcome to TFP. Your primary problem is lack of chlorine. Everything else is secondary. Get liquid chlorine to pour into your pool...
-
ajw22 replied to the thread Getting started dog in pool, SLAM, etc..Welcome to TFP. What FC level do you maintain with what CYA when not SLAMing the pool? What model SWG do you have and how long do you...
-
ajw22 replied to the thread Pentair MasterTemp 400 - no power at the unit.The MasterTemp Installation Manual specifies to use 18 gauge wire with a minimum 3/64” (1.2mm) thick insulation rated for a temperature...
-
ajw22 replied to the thread What is this stuff my vacuum keeps sucking up?.Gunite is the concrete shell. Then there are many different types of plaster finishes from different manufacturers that waterproof the...
-
ajw22 replied to the thread What is this stuff my vacuum keeps sucking up?.How old is your plaster? What type of finish is it?
-
-
Loading…
-
Loading…
-
Loading…
