- Joined
- Last seen
- Viewing thread Error code changed from 123 to 121 after replacing back board in Aqualink system
Latest activity Postings Media About
-
-
ajw22 replied to the thread Experience with Arctic Pool Heaters Brand (Heat Pumps).Some mention of Arctic Heat Pumps here but it does not look like anyone has experience with them…... -
ajw22 replied to the thread Blue Works BLSC compatible with Hayward salt cell?.Welcome to TFP. You need to ask Blue Works what cells work with their controller. Blue Works cells do not get good reviews here.
-
ajw22 replied to the thread Low salt light and inspect cell lights are both on.Check that the correct cell type is set in the controller. Post pics of the cell and its serial number.
-
ajw22 replied to the thread Pump pressure drops to zero..Do you have flow out of your pool returns? What does the water look like in the pump basket with the pressure at 0? What is shown on...
-
ajw22 replied to the thread What Aqualink do I have and how can I upgrade?.You need the IQ30-RS upgrade kit that will make your system a RS8. You can leave your PDA antenna installed to use your PDA for basic...
-
ajw22 replied to the thread Rust stain from metal objects.Rub a paste of vitamin C in a sock on the stains and they should lift.
-
ajw22 replied to the thread Solar Heaters on separate pump loop?.You can use a separate pump to circulate water through solar panels but there should be a filter after the pump and before the panels...
-
ajw22 replied to the thread OmniLogic Upgrade Kit from Prologic.I don't follow what you are saying. Here is a comparison between OmniLogic and OmniPL...
-
ajw22 replied to the thread Choosing a new pump.Post pics of the motor data plate. 1.5HP motor with a 1.5 SF is a 2.25 THP pump. You should get the 3HP Intelliflo.
-
ajw22 replied to the thread What order to plumb electrical heater..There is no substitute for BTU's. Get the largest heater your budget allows. A larger heater will heat the pool faster with the same...
-
ajw22 replied to the thread Circupool RJ45, low salt and check cell light on.Don't run your actual salt higher to make the SWG happy. Higher actual salt levels accelerate corrosion around the pool.
-
ajw22 replied to the thread What order to plumb electrical heater..No difference to what was discussed here.
-
ajw22 replied to the thread Replace Aqualogic PS8 with?.No one said that. The OmniPL controls Hayward and Pentair VS pumps. You would need to get an Aquarite controller to use your T15...
-
ajw22 replied to the thread 3 position actuator for pump running two water features?.Pentair has been promising for a few years their IntelliValve will do that. Maybe someday it will.
-
ajw22 replied to the thread 3 position actuator for pump running two water features?.Nope. You can have any two out of the three settings.
-
-
Loading…
-
Loading…
-
Loading…