G
Latest activity Postings Media About
-
-
GSo I replaced my pump and the new pump was bigger dimensionally and needed 10” of straight run for the intake. The other pump should...
-
-
Ggtty replied to the thread Can’t find what appears to be suction leak.Problem found and temporarily solved. Turns out one of the Jandy valves had a small crack in the housing on the underside about 4 inches...
-
Ggtty replied to the thread Can’t find what appears to be suction leak.Pool is full to the bottom of the overflow drain. Been down that road before. The weirs are both working and sucking water in through...
-
Ggtty replied to the thread Can’t find what appears to be suction leak.ssems like it was23 or so when I first installed the filter. Yes, I used the purple primer on both sides of the joint, as well cement.
-
Ggtty replied to the thread Can’t find what appears to be suction leak.I’m running at 3000. I’ve tried all speeds and this works best I’ve lubed the union seals a couple of times.
-
Ggtty replied to the thread Can’t find what appears to be suction leak.Ran a hose over all connections and pump didn’t change tone and basket didn’t fill. Took the pipe spool off and looked closely at the...
-
Ggtty replied to the thread Can’t find what appears to be suction leak.Yes. Leak is with all configurations. It figure it has to be the main jandy just before the pump or the pump itself.
-
GHi all. My 2hp single stage pentair pump died so I replaced it with a Leslie’s Jacuzzi JVS270S variable speed pump (max 2.7hp)...
-
-
-
Loading…
-
Loading…
-
Loading…
