Latest activity Postings Media Albums About
-
-
PoolStored replied to the thread New pool owner trying to understand test strip reading.Read the section on "pump runtimes" here: https://www.troublefreepool.com/wiki/index.php?title=Pump_Basics#Pump_Runtimes -
PoolStored replied to the thread New pool owner trying to understand test strip reading.I see your signature. Thanks! You have a variable speed pump. No reason to run at high speed. You run your pump for a reason. Read...
-
PoolStored replied to the thread New pool owner trying to understand test strip reading.You have low CYA. I have no idea what cell you have or output capacity or pump runtime. It is highly unlikely, even if you run a 2x...
-
I have been brushing down the pool and vacuuming these last 3 days and will continue. You guys are a great support group! Lol
-
PoolStored replied to the thread New pool owner trying to understand test strip reading.Pool Essentials Liquid Chorine from Walmart. Sure, you can up the SWG % tomorrow. Are you running 24/7? If so, set it to 80% output...
-
PoolStored replied to the thread New pool owner trying to understand test strip reading.You have, at least, proven the reliability of the test. Good Job! You will get there and the angst and time will greatly reduce. In 6...
-
PoolStored reacted to Pas_pool's post in the thread New pool owner trying to understand test strip reading with
Like.
Just tried again and it was 2.5 for FC. So I’ll have to stop and get some liquid chlorine to add tomorrow and do the overnight test... -
PoolStored replied to the thread New pool owner trying to understand test strip reading.Your best bet on short notice is Pool Essential Liquid Chlorine at Walmart.
-
That means the pump can push 40-60 PSI if the filter gets clogged enough, which I doubt it can. Backwash the sand filter when it gets...
-
PoolStored replied to the thread Tension break or freeze break?.Welcome to TFP!!! :shark: No way to tell. Either way it needs to be replaced.
-
PoolStored replied to the thread New pool owner trying to understand test strip reading.Not worth another test. It is a learning curve, but it gets WAAAAAY easier. Fill out your signature when you get a chance...
-
PoolStored reacted to Pas_pool's post in the thread New pool owner trying to understand test strip reading with Like.
Missed that part. I was trying to figure out why yesterday’s reading was 4 and today’s was 2. I don’t have any liquid chlorine yet. I’ll...
-
-
PoolStored reacted to 1poolman1's post in the thread Polaris 280 refuses to go into one part of shallow end with Love.
It looks like there is a return line right above that area. It may be forcing the hose away from that area. It looks like there is a...
-
PoolStored replied to the thread New pool owner trying to understand test strip reading.Dude, you didn't print out or read the OCLT instructions. Really need FC to be greater than 3ppm. Do you have liquid chlorine? Then...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…