Recent content by 1sato

Sent in a tech request to Hayward few days ago but no response. Am reaching out to learn other owner's experiences.

Yes, works. Model is SP 32950VSP installed by Florida Licensed Professional Pool installer who said the setting should be 1 on and 2 - 5 off.

Would like to hear from Tristar owners regarding their dip switch settings and configs.

Strange that the pump comes with dip switches having no function.

Right, but all have them, as shown in attached. What are the settings?

New Tristar SP32950VSP pump installed. Just want to be sure I’m understanding Dip Switch settings correctly for communication with my ProLogic PL-PS-16. The Prologic will be controlling the 950. What should those setting be?

Re: Guidance Needed: Hayward Check System "Exp. Unit Software PS-16 Comm Error" Well the problem has finally been resolved! My GLX-PL-LOC-PS16 (local display) was causing the new circuit board (GLX-PCB-PRO) to generate the "Exp. Unit Software PS-16 Comm Error" because the PS16 was expecting an...

Re: Guidance Needed: Hayward Check System "Exp. Unit Software PS-16 Comm Error" Agree. I found a chart here: https://www.hayward-pool.com/pdf/literature/automation-brochure-LITAUTOB14.pdf I don't believe a PS-16 display can serve as a virtual PS-8, but if you know otherwise then I'll work...

Re: Guidance Needed: Hayward Check System "Exp. Unit Software PS-16 Comm Error" Right, how to change the setting? The 16-V uses the PS-16 display. The "virtual" applies to extended soft keys that can be programmed but do not control actual relays because there's no expansion board. Still...

Re: Guidance Needed: Hayward Check System "Exp. Unit Software PS-16 Comm Error" Could virtual mode be the solution? I know that Hayward puts out virtual PS-8 and PS-16s. Would a virtual mode configuration not look for the expansion code?

Re: Guidance Needed: Hayward Check System "Exp. Unit Software PS-16 Comm Error" Good point! "Reset config to default" may not resolve the pairing of the PS-16 to the GLX-PCB-PRO, if there is a pairing involved at all. Plus the new GLX-PCP-PRO was at default when installed.

Re: Guidance Needed: Hayward Check System "Exp. Unit Software PS-16 Comm Error" Are you certain that the board can be reset after installation? And, if so, how?