Latest activity Postings Media About
-
-
Dirk replied to the thread Intelliph and Intellicenter.In the first pic above, note the screw and washer holding the IntellipH base to the pad. They've got some rust on them, but I think... -
Dirk replied to the thread Intelliph and Intellicenter.No. There are lots of stirrers available, just not one that will fit through the grid of an IntellipH. Which is why I fabricated it. I...
-
-
Dirk replied to the thread 10 Day Old IC-40 Just Went Dark.Other things to recheck. I think you said you replaced the o-ring and that didn't help. If not, do. Feel the o-ring all the way around...
-
It's glued to the PVC and all but indestructible. Usually the pipes or pad settles and they no longer line dead up. The union...
-
Dirk replied to the thread 10 Day Old IC-40 Just Went Dark.I'm in the other camp, I can't get things tight enough with just my hands anymore. I use a giant pipe wrench to give an extra 1/8 turn...
-
Also be mindful of overtightening. It took me 5 seasons to realize that as a big dude, my hand tight was tighter than the retirement...
-
Dirk replied to the thread IC40 says salt level is low while salt level reads 3800ppm. New flow switch added..Ha, I just read that back and it sounded a bit like a payola scheme. To be clear, the money you donate to TFP goes to infrastructure...
-
Dirk replied to the thread Intelliph and Intellicenter.Yep. I couldn't say. Mine is going on 5 years and it's fine. I'd be concerned about running it underground. Your PVC idea is good, but...
-
-
@Dirk - exactly what i was looking for thanks!
-
Dirk replied to the thread Intelliph and Intellicenter.I probably wrote to route the tube as far away from metal as possible, not getting a longer tube. I wouldn't try 100', though...
-
Dirk replied to the thread Robot vs manual vacuum.If your manual vac head is not performing, and you have the vac plate as good as it's going to get, you might try a different head...
-
Dirk replied to the thread Flow Vis H2flow meter/check valve.Yep, that's what I meant by "with the exception of certain types of bypasses." Here's an example of an SWG bypass: It's purpose is to...
-
-
-
One thing to be aware of is that if you have a heater bypass and only bypass some of the flow, then you could have different flow rates...
-
Dirk replied to the thread Never thought I'd ever have to worry but I need outdoor security cameras!.Money can be better spent on alarm/security systems, for sure. Other than the slight deterrent mine might provide, I didn't really...
-
-
Loading…
-
Loading…
-
Loading…
