Latest activity Postings Media About
-
-
PoolGate replied to the thread Undersized heat pump -- what to do?.Your pool is @ 5k gallons right? That heater is 15k BTUs, which isn't much. What it your budget? If the budget allows, you can't beat a... -
PoolGate replied to the thread Jandy JXi heater with Hayward Omnihub mystery.I suspect they won't because it is mixed with Hayward. I wouldn't either if I was them.
-
PoolGate replied to the thread Pool cover anchor question.They do, but the brass will tarnish and become less noticeable. Here is one example of a black one. It is still brass, just powder...
-
PoolGate replied to the thread Multiple skimmer cracks.Wow what is causing this? Ground movement? Ice? I think for sure I would go the epoxy/patching route before replacing it. Replacing will...
-
PoolGate replied to the thread Plumbing new heater.Those pads are worthless and I wish local codes would outlaw them for good. I highly suggest you pour another concrete pad for the...
-
PoolGate replied to the thread Adding CYA to pool for first time.In practice, there is no reason not to do this. Only caveat is not to backwash or clean your filter cartridges until the CYA has fully...
-
PoolGate replied to the thread Jandy low temp / low salt warning.For sure I would keep it going until it drops. That cell should add 6.8 FC each 24 hour period at 100% though.
-
PoolGate replied to the thread Need a flexible backwash hose…..just noticed my neighbors dying trees :/.https://www.amazon.com/Backwash-Clamps-Discharge-Ground-Swimming/dp/B0CRGS2634/ref=sr_1_1_sspa?crid=2ACWMQ9WT4Z11&dib=eyJ2IjoiMSJ9.ZmcrSG...
-
Well I jumped the gun. I saw an email from saltpoolstore.com about shipment and got a text from fedex at the same time and assumed it...
-
I didn't end up having to take the cell apart, as soon as I looked more closely at the center electrode I could see a gap and it pulled...
-
PoolGate replied to the thread Jandy pump advice.When you switch to "iAqualink", make sure you are getting the IQ30-RS kit and not the IQ20a. How much are you being charged for the...
-
PoolGate replied to the thread 2 Speed Hayward Pump Trips GFCI when on high.Is the pump the only thing on that GFI?
-
It is solid plastic. Looks like there may be moisture on the outlet side...ensure both of the input and output rings are tight. It is...
-
PoolGate replied to the thread Plumbing new heater.One thing I will suggest is while you have it apart, put in a single unified concrete pad. I have 2 of those worthless plastic pads and...
-
PoolGate replied to the thread iAqualink 2.0 Scheduling and Things Not Turning On At the Right Time.Let's see what shakes out. Maybe there might be an issue with the light transformer that is causing a delayed start. When you turn the...
-
-
Loading…
-
Loading…
-
Loading…
