Jandy/Zodiac iQpump01

[crosby1612]

Does anyone have experience with this device? I'm looking for a simple way to set up and control pump run times and it seems as though this might fit the bill? Is it fairly easy to install? I don't have a heater, spa, waterfall, etc; I just want something to set a run schedule and control it remotely if I need to. The pump is a Jandy variable speed.

Thanks

iQPUMP01: Mobile Pump Controller | Jandy

Looking for the iQPUMP01? Find this Mobile Pump Controller for the Perfect Pool Experience. Buy Now w/ a Pool Pro Near You!

www.jandy.com

 

[ajw22]

Lots of folks have the IQPump01.

Have you reviewed the Installation Manual to determine if it is within your abilities?

https://cdn.fluidrausa.com/-/media/zodiac/global/downloads/jandy/automation/h0509400.pdf?rev=a21297a37ce94ac8ba1e17ca42f7151c?force=1

It should do what you describe.

 

[TinFoilHat]

Doesn't the Jandy pump have it's own timer schedules in it since it's a VSP? What else would you need?

 

[crosby1612]

Thanks. I did look at the install manual; it seems pretty straightforward. HOWEVER (maybe you can answer this for me?): The RS485 connector is already occupied. I'm assuming it's connected to the JEP-R controller? And there's only one DIP with switches labeled "3" and "4".

I'm assuming I need to disconnect the JEP-R controller as it won't be used but what's the deal with the DIP switch? The install instructions clearly state it should be either a a 4 or 5 position switch; clearly it isn't.

Photo attached.

Thank you for any advice!

 

[crosby1612]

Doesn't the Jandy pump have it's own timer schedules in it since it's a VSP? What else would you need?

Not sure what you mean by the pump has its own timer schedules in it. I'm looking for something I can program remotely.

 

[ajw22]

Thanks. I did look at the install manual; it seems pretty straightforward. HOWEVER (maybe you can answer this for me?): The RS485 connector is already occupied. I'm assuming it's connected to the JEP-R controller? And there's only one DIP with switches labeled "3" and "4".

I'm assuming I need to disconnect the JEP-R controller as it won't be used but what's the deal with the DIP switch? The install instructions clearly state it should be either a a 4 or 5 position switch; clearly it isn't.

Photo attached.

Thank you for any advice!View attachment 637354

Yes, you disconnect the JEP-R. Leave the dip switches - OFF OFF.

https://cdn.fluidrausa.com/-/media/zodiac/global/downloads/jandy/pumps/h0707400.pdf?rev=725e92fc111d483a8956a4569024eec2?force=1

 

[TinFoilHat]

Not sure what you mean by the pump has its own timer schedules in it. I'm looking for something I can program remotely.

I missed the part about the remote program. I just set my VSP and leave it. Everyday.

 

[crosby1612]

Yes, you disconnect the JEP-R. Leave the dip switches - OFF OFF.

https://cdn.fluidrausa.com/-/media/zodiac/global/downloads/jandy/pumps/h0707400.pdf?rev=725e92fc111d483a8956a4569024eec2?force=1

View attachment 637355

Perfect. Thank you