iAqualink programing

[jlim0930hh]

For some reason my pool kept turning on during nights even when it wasn't programed to(its not freeze protection), so I decided to take screenshots of all the screens and clear memory and now trying to program it back. The original programing was done by the pool builder.

In the VSP Speed Setup screen, originally speed 1 was set to pool assigned to Aux as "Aux B6"

When I go and try to find "Aux B6" it does not show up.... only Aux1, Aux2, Aux3, Extra Aux is showing up.

How can I get this assigned to Aux B6?

I have RS-4 Combo.

 

[ajw22]

How old is your Aqualink and what version Firmware is in it? The latest models have a bunch of new features and some different setup.

@MSchutzer @PoolGate have you seen this?

 

[PoolGate]

Very interesting. There is no B6 with an RS4 system.

"Pool" is not assigned to any aux BTW so just leave it as N/A.

 

[jlim0930hh]

Its about 4-5 years old

 

[ajw22]

Rev T.2 is before the new features.

Try what @PoolGate suggested and leave the POOL AUX circuit blank.

 

[MSchutzer]

It looks like you Pool builder renamed one of your Aux’s “Aux B6” and assigned it to your Pool speed for some unknown reason. It looks like a couple of your other Aux’s are renamed to Waterfall and Cleaner.

Before you cleared things out did you capture this screen?

This screen shows your available Aux’s and what they have been renamed to.

In you original programming you likely had your available Aux’s renamed to “Aux B6”, Waterfall, and Cleaner.

If your available Aux’s were renamed as such then you have an “Aux B6” name that you could assign to a VSP speed. I’m not sure why you would want to do this though, I would just leave it blank as others have suggested.

 

[jlim0930hh]

Rev T.2 is before the new features.

Try what @PoolGate suggested and leave the POOL AUX circuit blank.

Thanks that’s what I did for now

 

[jlim0930hh]

It looks like you Pool builder renamed one of your Aux’s “Aux B6” and assigned it to your Pool speed for some unknown reason. It looks like a couple of your other Aux’s are renamed to Waterfall and Cleaner.

Before you cleared things out did you capture this screen?
View attachment 635105
This screen shows your available Aux’s and what they have been renamed to.

In you original programming you likely had your available Aux’s renamed to “Aux B6”, Waterfall, and Cleaner.

If your available Aux’s were renamed as such then you have an “Aux B6” name that you could assign to a VSP speed. I’m not sure why you would want to do this though, I would just leave it blank as others have suggested.

No Before clearing the memory (i dont have a screenshot) but I took notes and it showed

Aux Label
Aux1 Cleaner YES
Aux2 Air Blower NO
Aux3 Pool Light NO
Extra Aux Waterfall YES

 

[MSchutzer]

Then I don’t have any idea how Aux B6 showed up, maybe it was some configuration corruption?

 

[PoolGate]

Then I don’t have any idea how Aux B6 showed up, maybe it was some configuration corruption?

This is possible. It is working now though right?