Pool from the 50s or 60s
- Thread starter Bowen0525
- Start date
- Jul 21, 2013
- 65,170
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Really not much there.
Black pump on the floor.
Big grey cylinder is a sand filter with a multi-purpose valve (MPV) on the top.
No heater. No chlorinator.
The light blocks seeing where the three pipes from the pool go to. At least one pipe is the suction water from the pool into the front of the pump. The water exits the pump on top and is pushed into the filter MPV. The water flows through the sand filter and back to the pool returns.
The first pipe, most right most, is a waste line from the MPV that discards dirty water when the filter is backwashed.
The plastic buckets are chemicals that TFP probably does not recommend using.
MPV Valves - Further Reading
www.troublefreepool.com
Non-Recommended Pool Chemicals
These pool chemicals should not be added to your pool. Save your money and frustration and avoid these chemicals!
www.troublefreepool.com
Pool Care Basics Archives
Your one-stop shop for all things TFP to include: ABCs of Water Chemistry, Recommended Chemicals/Levels, Test Kits, Troubleshooting, and much more!
www.troublefreepool.com
sktn77a
Gold Supporter
Labor is the biggest part of any pool reno. If you know how to DIY, and there are no shell or plumbing cracks/leaks, you should be good to go with an estimate close to Allen's.
Similar threads
