Intellicenter wifi

Jump to latest Follow Reply
A

adam.engel01

Member
Dec 19, 2023
16
Florida
Hey all,
You guys have been a wealth of knowledge so far and as much research as I have done I once again need some help. I got a pentair intellicenter. I have the outdoor WiFi egg but I don’t have the inside box and since I see the numbers need to match I’m assuming I need to buy a whole new WiFi link…? I starting looking into purchasing a whole new link and I am seeing so many part numbers for these I don’t know which one I should be looking for. Any help is appreciated.
 

Attachments

  • image.jpg
    image.jpg
    388.7 KB · Views: 8
  • image.jpg
    image.jpg
    466.6 KB · Views: 7
  • image.jpg
    image.jpg
    399.3 KB · Views: 7
You have the 900 MHZ wireless link, not a WiFi egg.

Is your IntelliCenter a new system? How do you have the outdoor unit and not the indoor unit? You need matching units.

The entire kit is P/N 523434 or 523557

Pentair Automation Systems - Further Reading

www.troublefreepool.com www.troublefreepool.com

1736296678717.png

 
This was install
ajw22 said:
You have the 900 MHZ wireless link, not a WiFi egg.

Is your IntelliCenter a new system? How do you have the outdoor unit and not the indoor unit? You need matching units.

The entire kit is P/N 523434 or 523557

Pentair Automation Systems - Further Reading

www.troublefreepool.com www.troublefreepool.com

View attachment 623773

Click to expand...
I got it second hand and obviously don’t know what I’m doing. 😂 I’m learning as I go I guess. Trying to upgrade my current system
 
adam.engel01 said:
What is the difference between the pn you said vs 523596?
Click to expand...
Pentair has sold the same wireless link bundled for different systems. 523596 is the part number for the EasyTouch/IntelliTouch Screenlogic version. It is missing a few of the wires needed for the IntelliCenter.

Did you get the POE pigtail that connects to the IntelliCenter board? Does the egg board you have power up?
 
The ou
ajw22 said:
Pentair has sold the same wireless link bundled for different systems. 523596 is the part number for the EasyTouch/IntelliTouch Screenlogic version. It is missing a few of the wires needed for the IntelliCenter.

Did you get the POE pigtail that connects to the IntelliCenter board? Does the egg board you have power up?
Click to expand...
the outdoor unit seems to be fine. Not sure how to tell if the egg board powers up.the screen on the intellicenter does power up.
 
Some of the LEDs should be lit up.

Show me pictures of how it is connected to the board.
 
ajw22 said:
Pentair has sold the same wireless link bundled for different systems. 523596 is the part number for the EasyTouch/IntelliTouch Screenlogic version. It is missing a few of the wires needed for the IntelliCenter.

Did you get the POE pigtail that connects to the IntelliCenter board? Does the egg board you have power up
Click to expand...

ajw22 said:
Some of the LEDs should be lit up.

Show me pictures of how it is connected to the board.
Click to expand...
It isn’t hooked up to the pool yet but I ran a wire from my panel to check it all. I did not look for anything on that portion. Here is a picture of the board. Hard to see what’s going on but I hope that helps.
 

Attachments

  • IMG_9514.jpeg
    IMG_9514.jpeg
    520.7 KB · Views: 6
You have the POE pigtail connected to the board.

If 523596 has matching units, it should work.

1736300667125.png
 

Enjoying this content?

Support TFP with a donation.

Give Support
You must log in or register to reply here.
Top Bottom
Back
Jump to latest Follow Reply