Our Wet Edge Luna Quartz plaster is a year old and has been through two hot starts trying to resolve splotchiness since construction. This did not resolve the splotchiness issue and has caused our plaster to become very rough to the touch. I had heard that diamond pad polishing Luna Quartz is not effective. Is this true? Does anyone have experience with this?
Diamond Polish Wet Edge Luna Quartz?
- Thread starter rj58
- Start date
- Jul 21, 2013
- 65,342
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
I suggest you try polishing a small area and see how it works for your plaster situation.
www.troublefreepool.com
I suggest you try polishing a small area and see how it works for your plaster situation.
Plaster Installation and Maintenance - Further Reading
www.troublefreepool.com
Thanks for the link. I'm wondering though if anyone has polished Wet Edge Luna Quartz specifically, and if they are satisfied with the results.Welcome to TFP.
I suggest you try polishing a small area and see how it works for your plaster situation.
Plaster Installation and Maintenance - Further Reading
- Jul 21, 2013
- 65,342
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I have Luna Quartz. It appears the little quartz bits are at the surface of the plaster. Polishing might actually remove them. I agree with @ajw22 that you should try a small, inconspicuous area and see what happens.
Last edited: