I just had a new pool built and the pool builder did not add an auto fill valve - is it easy to install an automatic fill valve? And what auto valve would you recommend? The pool builder chose Jandy equipment.
Adding Auto Fill Valve
- Thread starter saraah
- Start date
joshuaj1975
Well-known member
It's too late without tearing up and replacing a part of the Kooldeck as the auto fill is embedded into it.
joshuaj1975
Well-known member
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.www.facebook.com
For the idea. I don’t know why they are charging this much super easy and cheap to make.
Attachments
- Sep 23, 2015
- 2,012
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Astral Viron V25
As a prototype that’s not a bad effort but using clear primer and glue would make it look a lot better. If it’s connected via a garden hose leaving it on full time is a bit of a worry. Eventually the garden hose connection will fail if left permanently presurised.
It wouldn’t be to hard to make one from bits from a hardware. I’ve made one in a square shape using a side entry toilet valve. I use a battery operated timer tap to limit the possibility of failure. I give it 20-30 minutes per day.
There are commercially available options.
I based my design on this one.
It wouldn’t be to hard to make one from bits from a hardware. I’ve made one in a square shape using a side entry toilet valve. I use a battery operated timer tap to limit the possibility of failure. I give it 20-30 minutes per day.
There are commercially available options.
I based my design on this one.
Similar threads
