New Hayward Ozone pool owner here

Our water is clear . I am having issues of this substance collecting on the bottom( seems to be moving like powder when you brush the pool) and making the bottom of the pool looking like it has stain
 
Yep! Add 5ppm of chlorine per day until it arrives.

You can use your pH test looks to be about 8. Lower it by .4. Use pool math to figure out how much muriatic acid to add.

Complete all the other tests and report those results. If CYA is high, we may need to replace some water.

Do all the tests now.
 
This might sound dumb...but I have no idea what 5 ppm chlorine per day means🤦🏻‍♀️

Should I do the PH first then the liquid chlorine????
And does it matter what brand of liquid chlorine????? Like is Pool essentials ok or Clorox Pool algecide?
 
This might sound dumb...but I have no idea what 5 ppm chlorine per day means🤦🏻‍♀️
Download pool math, configure your pool. Use "effects of adding" to calculate how much chlorine will add 5ppm.
Should I do the PH first then the liquid chlorine????
And does it matter what brand of liquid chlorine????? Like is Pool essentials ok or Clorox Pool algecide?
Either one. Just wait 15 minutes between those additions.

Pool Essentials is excellent. Never use CLOROX, and don't put any algaecide in the pool.
 
Download pool math, configure your pool. Use "effects of adding" to calculate how much chlorine will add 5ppm.

Either one. Just wait 15 minutes between those additions.

Pool Essentials is excellent. Never use CLOROX, and don't put any algaecide in the pool.
Ok sounds good! I have the app.... I ll give it a go tonight and add some muratic acid and later chlorine
 
  • Like
Reactions: PoolStored
What test kit did you get? Did you get one of the recommended ones? It should have a FAS-DPD FC test, powder and drops. 0870 and 0871.

FC, left side: You have some chlorine in the pool. You should ignore this test and use the FAS-DPD.
pH: 8.2 or higher. Lower your pH in .4 increments until you get to 7.4.

What were your other results?
 

Enjoying this content?

Support TFP with a donation.

Give Support
What test kit did you get? Did you get one of the recommended ones? It should have a FAS-DPD FC test, powder and drops. 0870 and 0871.

FC, left side: You have some chlorine in the pool. You should ignore this test and use the FAS-DPD.
pH: 8.2 or higher. Lower your pH in .4 increments until you get to 7.4.

What were your other results?
No remember I got the dPD test kit at Lealies I have the salm drops on the way
 
  • Like
Reactions: PoolStored
Add enough muriatic acid to lower pH by .4. pump running. Test again 30 minutes later. repeat until your pH is 7.4.

Do you now have Pool Math? Link-->PoolMath
 
I'm not sure I understand...did you order a FAS-DPD KIT? Either a Taylor K-1515 or this...Link-->FAS/DPD Chlorine Test Kit

Should have R-0870 powder and R-0871 reagent.
I have DPD test kit but it didn't have the powder and the 0871 and you gave me the link to order just that ...I received it today but don't know how to use it
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.