CSI and CH important on vinyl pool with SWG

[denofa]

Hey all!

Things have been going swimmingly (har har) since SLAMing my swamp pool back in March/April. SWG + Dolphin makes everything near maintenance free, so I'm trying to create problems for myself.

My most recent testing gave me the following results:

FC: 7
pH: 7.7
TA: 80
CH: 70
CYA: 70
Salt: 3200
Temperature: 85*F
Borates: I'm assuming around 40

This puts me at a CSI of -0.81 according to PoolMath. I know I am shooting for above -0.6, ideally above -0.3.

Considering I don't have a plaster pool or any tile, how much should I worry about getting CSI above -0.6? If I need to bring it up a bit, would my best bet would be to increase the CH up to ~250? Would I be creating a scale issue with my SWG cell by doing this?


Thanks for any feedback!

 

[duraleigh]

Watching csi is virtually irrelevant for a vinyl pool.

 

[denofa]

Watching csi is virtually irrelevant for a vinyl pool.

That's what I was thinking, but thanks for confirmation. It sounds like SWG will only have issue with high CSI vs. low?

 

[mknauss]

It sounds like SWG will only have issue with high CSI vs. low?

Correct.

Turn off Track CSI in the app.

 

[denofa]

Thanks y'all!