Neptune 2.7 vsp Error

[TJ Atwal]

Have the error light flashing on my Neptune 2.7 VS pump. It’s states No DI at power up wait… anybody have a fix? Followed everything in the manual and still nothing. Checked all wiring at well. Pump was installed on 5 days ago and was working

 

[JamesW]

https://acim.nidec.com/motors/usmotors/-/media/USMotors/Documents/TechDocs/Manuals/Neptune-16527-THP-Pool-Pump-Installation-and-Operation-Guide.pdf

 

[TJ Atwal]

Are you able to use the Pentair automation system with a Neptune pump? Got the pump working but now can’t get it to automate with the Pentair application

 

[mknauss]

You cannot use a non Pentair VS pump with Pentair automation.

You can run the power through a Relay and turn it on and off, but that is it.

 

[JamesW]

 

[JamesW]

EZ-Comm™

The interface adapter marries the Affinity with the homeowner’s pool automation control system, giving the control system command over the Affinity Variable Speed Motor.

The Affinity Variable Speed Motor comes standard with a RS-485 port and the interface adapter can be purchased separately

https://acim.nidec.com/-/media/USMotors/Documents/Literature/Brochures/Affinity_Motor_Brochure.pdf

Service & Support

acim.nidec.com

Contact Us

acim.nidec.com

https://acim.nidec.com/motors/usmotors/~/media/USMotors/Documents/TechDocs/Manuals/EZ-COMM_Interface_Manual.ashx

 

[TJ Atwal]

So what you’re saying is that the Neptune pump cannot be programmed to the Pentair easy touch system?

 

[JamesW]

So what you’re saying is that the Neptune pump cannot be programmed to the Pentair easy touch system?

Contact Nidec to ask them.

Contact Us

acim.nidec.com