We have an IC SWG. I need help understanding the “Sanitizer Output” LED lights. They had been flashing for several weeks and during this time the Salt Level was "good" per the light on the SWG. During that time, our FC has ranged from 2.6 - 4.8; today it was at 3 and those lights were still flashing. We had the output (on the app) set to 7%. That seems to be our sweet spot to prevent FC from getting too high. However, I’m guessing the Sanitizer Output lights aren’t meant to be flashing all the time? So we played with the output and it looks like if we set it at 11% or over, the lights stop flashing and just the first 2% light was illuminated consistently.
We will monitor this and see what it does to our chlorine levels but from experience it’s going to cause it to increase. What is the optimal setting here? Does it matter if the lights are consistently flashing?
We will monitor this and see what it does to our chlorine levels but from experience it’s going to cause it to increase. What is the optimal setting here? Does it matter if the lights are consistently flashing?