- Mar 19, 2021
- 186
- Pool Size
- 15000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
noticed water was v cloudy yesterday. FC about zero. I had the SWGC on very low output given colder weather we just went through but last few days heat and sun shot up, I didn’t adjust it and clearly it lost ground so wasn’t producing enough chlorine.
Tried running it 100% for a few hrs but wasn’t catching up fast enough. So turned it off and took water to slam level. This morning water is still v cloudy (no visible algae or dirt) OCLT outcome was FC loss of 8ppm.
That 8ppm loss seems huge to me given aside from cloudiness water looks fine (not green, no algae that I can see). Is it possible my reagents are bad?! I’ll keep this going but wanted some thoughts from you folks…
Tried running it 100% for a few hrs but wasn’t catching up fast enough. So turned it off and took water to slam level. This morning water is still v cloudy (no visible algae or dirt) OCLT outcome was FC loss of 8ppm.
That 8ppm loss seems huge to me given aside from cloudiness water looks fine (not green, no algae that I can see). Is it possible my reagents are bad?! I’ll keep this going but wanted some thoughts from you folks…