Has anyone had any experience with Jandy repair service in CA? My pool guy says I need a whole new system @ $6300! Says there is a short in the circuit but offered no help in trying to fix it. Need a second opinion or someone to repair what I have thanks
Jandy AquaLink Repair
- Thread starter T. Fitz
- Start date
- Jul 21, 2013
- 65,118
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
I doubt you need a whole new system. And a whole new system should cost less then $6,300.
Do you have the interest in trying to repair it yourself?
Your location says Hilton Head but you are asking about a repair service in CA???
Some members have had good experiences with BP Engineering, Inc. repairing their Jandy boards.
www.troublefreepool.com
I doubt you need a whole new system. And a whole new system should cost less then $6,300.
Do you have the interest in trying to repair it yourself?
Your location says Hilton Head but you are asking about a repair service in CA???
Some members have had good experiences with BP Engineering, Inc. repairing their Jandy boards.
Jandy Aqualink RS - Further Reading
www.troublefreepool.com
- Jun 7, 2017
- 9,967
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
He wants to sell you an entirely new system because that's all pool builders/maintenance people know how to do.
Before I went a different route, I reached out to the guy at BP Engineering, he seems to be a good dude and the repairs are cheap.
Before I went a different route, I reached out to the guy at BP Engineering, he seems to be a good dude and the repairs are cheap.
Hello I am looking for a repair shop to repair my pda. It is 3 years and I replaced my batteries and still no screen.
- Jul 21, 2013
- 65,118
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I have had Jandy boards repaired by BP Engineering and been very happy (board for spa heater and main circuit board)
I have also used BP Engineering for board repair. I was very satisfied with Bob's service - prompt and very reasonable. It sure beats buying a new All Button panel for $600+ or a used one on eBay for half that.
Maybe take a picture of your system so we can understand what you have.
I did a complete upgrade to my PCB and antenna to go from a PDA set up to a wireless setup for less then $2k and I bought new equipment from a authorized dealer. There is no need to change the box/housing. The $6300 sounds ridiculous.