I had the same conclusions so no finger pointing from me.
Iowa Vinyl Pool
- Thread starter Snoobug
- Start date
- May 7, 2014
- 429
- Pool Size
- 29980
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
BAR...it's a metric unit of measurement for pressure.
- May 7, 2014
- 429
- Pool Size
- 29980
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
You are correct.Barometric pressure I believe.
The bar is a metric unit of pressure, but not part of the International System of Units (SI). It is defined as exactly equal to 100,000 Pa (100 kPa), or slightly less than the current average atmospheric pressure on Earth at sea level (approximately 1.013 bar).[1][2] By the barometric formula, 1 bar is roughly the atmospheric pressure on Earth at an altitude of 111 metres at 15 °C.
Thank you!
Ok another dumb question... how do I add my filter pressure to pool math? I went to settings and added it as an extra tracking item.
CTFocusST
Well-known member
- Jul 4, 2019
- 235
- Pool Size
- 13500
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Go into settings and make sure track filter pressure is turned on. And then to add an entry it is under perform maintenance
That should be it. I would hold off for now. You may need a mini SLAM once the pool is handed over to you. At that point run it at full rpm for your baseline. Less PSI works too but it’s easier to tell 25% of the bigger # when the time comes.
What a difference a few hours of filtering makes! It's already changing colors!
^^^. I have never seen a picture say the pool was filled, more than that. 
If it’s any consolation, an insane May and June with 3 digits every day made us pull the trigger last time. July was so hot the concrete walls caked on the outside and stayed soupy in the middle taking a few weeks to harden. The pool was complete at the end of July on a 60 degree rainy day and August was 60/70 everyday.
If it’s any consolation, an insane May and June with 3 digits every day made us pull the trigger last time. July was so hot the concrete walls caked on the outside and stayed soupy in the middle taking a few weeks to harden. The pool was complete at the end of July on a 60 degree rainy day and August was 60/70 everyday.
If there are no bubbles it can appear empty when its full. Change speeds and try to,make a bubble happen
Omg I'm scared to touch it...
I don't know anything but what I've read in the manual over a month ago... I'm going to wait... I hope you are right. The water is circulating so it must be working...Thank you for responding so quickly!
Oh, well jeeeze........ that makes all the difference!!!!! Yeah, you are 100% fine. The pump basket water can be so clear its fooled us all. And many times each.