Omnihub add 3rd GVA-24 Actuator

[joeymorovis]

Hi,
Hope everyone is ok and safe. I have the Omnihub with heater, salt chlorinator, corelogic lights and two actuators. Since I have a Spa and the pool have an infinity edge I need a third actuator to have a fully automatic solution. There’s a way the Omnihub can control a third actuator?

 

[Pool_Medic]

Mine controls three valves.

 

[joeymorovis]

Mine controls three valves.

Omnihub or Omnilogic? Which version?

 

[joeymorovis]

Omnihub or Omnilogic? Which version?

I meant, in the documentation states that is up to two actuators. What I need to know if theres additional board or something like the addition for Aquarite for adding more actuators.

 

[ajw22]

No, the Omnihub only has sockets for two valve actuators.

What do you need the third actuator to do?

 

[joeymorovis]

No, the Omnihub only has sockets for two valve actuators.

What do you need the third actuator to do?

My pool have a spa with overflow and the pool have a infinity edge. I have it configure right know with one valve for closing/opening main drain and spa drain and the other to closing pool returns (spa mode or pool mode with overflow) I want the third one to control the pool overflow to the catch basin, to opening/closing main drain and catch basin.

 

[ajw22]

Do you want to manually control that 3rd actuator?

Do you have a relay open? You can wire up a 24V circuit controlled by a relay to activate an actuator.