Upgrading our Intex 12x24 Ultra pump, filter, heater

Afotomama

Well-known member
Apr 30, 2019
48
Daphne AL
Pool Size
8400
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Intex Krystal Clear
We are entering our third season with our Intex Ultra 12x24x52 8400 gal saltwater pool. This summer we plan to add a deck, upgrade the pump/filter, and hopefully add a heater. We already added the Hayward through wall skimmer and upgraded the piping to 1.5" last season. We are in coastal Alabama and it's been a struggle keeping the pool clear. We also had limited placement and therefore get a lot of leaves, pine needles, etc in the pool as well as a lot of rain. Please help with equipment suggestions?
A friend is helping with some of these projects and he recommended these items for upgrades.

19" sand filter

1.5 HP dual speed pump

Are these options going to work with our Intex saltwater system? Or is there a better setup?

Besides being too small, the other thing I hate about our current system is that you can either run the filter manually (on or off), or you can set it for the saltwater generator to come up for up to 12 hours, but then it turns off the SWG and the filter as well. I'd love to be able to have a timer so that the SWG can work but that the filter can then stay on if we wish. Not sure what is required for that.

In addition, we are looking at this heater:

Is this a good heater for our pool? Also, we have a natural gas line that is hard plumbed for a grill (we have never used it, I think it involves getting someone here to turn it on, no idea how that works). Would it be better to try to use the natural gas or just to get a propane heater or some other type? We just want to extend our season by a month on each end as no one in my house will get in a pool under 83 or so.

Would love to hear from anyone who has experience with this type of setup. Also not sure if we need to add any addtional return to deal with the additional flowrate. Here's how it looks now:
 

Attachments

  • 20210519_122631.jpg
    20210519_122631.jpg
    316.8 KB · Views: 13
Those 2 should work just fine.. As for the Intex SWG, how did you hard pipe it in? If it is already hard piped in I think you can just switch it over...

I have no idea about the heater :)
 
Those 2 should work just fine.. As for the Intex SWG, how did you hard pipe it in? If it is already hard piped in I think you can just switch it over...

I have no idea about the heater :)
Ahhh, yes, I forgot about the fact that the Intex system is a pump, filter, and SWG all in one. So if I buy this pump and sand filter, I'll also need to purchase a new SWG! Ugh!!!! Now I'm really not sure what to do!!!!
 
The pump and filter are really needed but the SWG is really nice to have :)

All chlorine is getting expensive right now...
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.