2 days ago I installed a Bestway power steel AGP (13',3"x6'7"x39,4") on foam floor mats on our paved patio. After my son and I put it together, I checked if it was level on the top frame and (I thought) it was. After filling halfway I checked the water level and is was about 0,5 inch off max. So I thought it was OK, until I noticed a creaking sound on 1 side when I was in the pool yesterday. It appears that the patio itself isn't level (bumpy? I'm not sure if this is the correct word). I checked and put the (2 meter long) level on the top of the frame and it appears quite level but I now see it's not touching the frame in the middle. I can see there's more pressure on the liner there. Would it be possible to leave it up for a month or is there a high risk the frame or liner won't hold? I'll attach some pictures (the pictures with the tape measure
are in centimeters not inches) Thanks in advance for your advice.
are in centimeters not inches) Thanks in advance for your advice.
. The water line looks good and is within 0,5 inch. But I can still see more pressure to the liner. The liner is pressing against the 2 U-stands more there (the stands are visible in the liner inside the pool, whereas anywhere else they're not) and I can feel that the connection between the 2 bars isn't exactly even. There seems to be sagging in my patio right there, so the left side is higher than the right side. The bar is making just a tiny little bit of a v-shape at the connection. The liner seems to be lifted there just a little bit there too. And the water level is 0,4-0,5" off exactly there. Considering this, do I still have nothing to worry about? I have a small yard and I'm afraid someone will get injured or to flood my neighbors yard and basement.