- Jul 3, 2019
- 423
- Pool Size
- 16500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Truclear / Ei
Been using local pool stores and my Lamotte Color Q for testing the water. When testing the FC, between the pool store and my color q, I was always within 1-2 ppm different which usually fell around 4-6 ppm.
Now I just got the TF 100 kit and Im getting a reading of 9- 11 ppm FC.
Based on my salt cell, the Cell produces 6.7 PPM per 24 hours @ 100%. If I am running it at 90% = 6.03 in 24hrs. 6.03 / 24 = 25 ppm per hour. .25 x 16 hours (current pump run time) = 4.0..... How am I getting a FC of 11? Its been sunny as heck here in Florida. Do I need to bump my cell out put way down?
Current test results
FC 11
PH 7.4
ALK 80
CYA 70
CH 500
Salt 3400
Now I just got the TF 100 kit and Im getting a reading of 9- 11 ppm FC.
Based on my salt cell, the Cell produces 6.7 PPM per 24 hours @ 100%. If I am running it at 90% = 6.03 in 24hrs. 6.03 / 24 = 25 ppm per hour. .25 x 16 hours (current pump run time) = 4.0..... How am I getting a FC of 11? Its been sunny as heck here in Florida. Do I need to bump my cell out put way down?
Current test results
FC 11
PH 7.4
ALK 80
CYA 70
CH 500
Salt 3400