Glass tube pool heater

Jump to latest Follow Reply
Metalman23

Metalman23

0
Bronze Supporter
Apr 21, 2018
137
Central CT
Pool Size
30000
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
CircuPool Universal40
Anybody have any experience installing and using these systems? I got one for free from a friend,
IMG_20200321_131847257_HDR.jpgIMG_20200321_133855666_HDR.jpgIMG_20200321_133947650_HDR.jpg
I'm wondering if I should put a circulator pump that only runs during the day? Or plumb it into the pool pump? Maybe have a diverter tee sending some water to the heater...
 
That a solar heater? Who is the manufacturer? It come with any installation instructions?
 
Before you install that I'd make sure it has enough heat capacity to be worthwhile. From the this manufacturers website (below), the 20 tube model produces a maximum of 5000 BTU/hr and the 30 tube 7500 BTU/hr. By comparison, many gas pool heaters produce 100,000 - 400,000 BTU/hr. You would probably have to have several of the units in order to be effective. However, the product on the website that I listed looks completely different that what you have. I bet the manufacturer of your product has some specific recommendations for BTUs needed for your situation.

www.solartubs.com

Solar Pool Heaters - Solar Pool Heating | Northern Lights Solar Solutions

Solar water heating - We offer DIY solar water heating solutions for solar hot water, pools, space heating and industrial heating applications. Visit us to know more!
www.solartubs.com www.solartubs.com
 
Last edited:
Steve_in_C said:
Before you install that I'd make sure it has enough heat capacity to be worthwhile. From the this manufacturers website (below), the 20 tube model produces a maximum of 5000 BTU/hr and the 30 tube 7500 BTU/hr. By comparison, many gas pool heaters produce 100,000 - 400,000 BTU/hr. You would probably have to have several of the units in order to be effective. However, the product on the website that I listed looks completely different that what you have. I bet the manufacturer of your product has some specific recommendations for BTUs needed for your situation.

www.solartubs.com

Solar Pool Heaters - Solar Pool Heating | Northern Lights Solar Solutions

Solar water heating - We offer DIY solar water heating solutions for solar hot water, pools, space heating and industrial heating applications. Visit us to know more!
www.solartubs.com www.solartubs.com
Click to expand...

It looks like it has 40 tubes, well each unit has 20,
ajw22 said:
That a solar heater? Who is the manufacturer? It come with any installation instructions?
Click to expand...

Yes, no idea who the manufacturer is and no instructions, the stainless tanks are insulated, and there is a heat exchanger inside, the open end of the glass tube goes into the stainless tank, and the while thing is supposed to be tilted at an angle to catch the sun's rays, I saw some videos yesterday where the temp inside one of these was pushing 100 degrees
RDspaguy said:
That looks like fun. Never seen a solar heater like that before.
Click to expand...
I think it'll be interesting to see if I can assemble it properly and if it even works, it's supposed to crwtavheat as long as the sun I shining, I'm actually tempted to hook it up now, especially if our state ends up getting shut down, I'll have a project to keep me busy.
 
Just looking at the heat transfer claim of 7500 btu/hr I agree with previous thread that's not enough to do any good for a pool. I get at least 100,000 btu/hr when my panels are at peak performance right now in Florida. My installation has 9.5 panels. That's only for about 4-6 hr/day but is usually enough for 4-6 deg and gets my pool to or very close to comfortable swimming for my wife so I just top off with gas heat for an hour or two (266K Btu heater).

Will be interesting to see if there's something I'm missing. Price is also robust. 4X12 traditional solar panel sells for about $600. My 9.5 panels cost $5000 including installation. Of course that doesn't compare to your free deal.

Please do keep us informed, it's always neat to see something new tried out on TFP.

Chris
 
setsailsoon said:
Just looking at the heat transfer claim of 7500 btu/hr I agree with previous thread that's not enough to do any good for a pool. I get at least 100,000 btu/hr when my panels are at peak performance right now in Florida. My installation has 9.5 panels. That's only for about 4-6 hr/day but is usually enough for 4-6 deg and gets my pool to or very close to comfortable swimming for my wife so I just top off with gas heat for an hour or two (266K Btu heater).

Will be interesting to see if there's something I'm missing. Price is also robust. 4X12 traditional solar panel sells for about $600. My 9.5 panels cost $5000 including installation. Of course that doesn't compare to your free deal.

Please do keep us informed, it's always neat to see something new tried out on TFP.

Chris
Click to expand...
I'll post some pics and info when I get started, the way I see it, even if it's only 7.5 or 15k btu, that's a lot more than nothing,

I'm also working on an automated chlorine feeder, using a peristaltic pump, a timer and a 12v power source. I'm more excited about the chlorine feeder than the heater.

Also I'm going to experiment with modifying my pool pump, having to do with flow rate and power consumption, I'll report back with my findings.
 
Metalman23 said:
I'll post some pics and info when I get started, the way I see it, even if it's only 7.5 or 15k btu, that's a lot more than nothing,
Click to expand...
Great point and the price was definitely right!.

Good luck and please to keep us posted on your progress. You're venturing into unknow territory which is more than interesting to most of us.

Chris
 
RDspaguy said:
That looks like fun. Never seen a solar heater like that before.
Click to expand...
Interestingly enough, we saw those all over the place in St Lucia. Hot water heater with hot water storage tank. I believe they work by convection and need no pump for operation.

In a place like St Lucia, with lots of sun and never getting to freezing this style of heater wouldn't even need a heat exchanger. Just run the tap water directly through it like any other sort of water heater. Dead easy. That, coupled with limited resources on a small island, is probably why even the poorest houses had this style of water heater on the roof.
 

Enjoying this content?

Support TFP with a donation.

Give Support
RDspaguy said:
We use those for commercial pools. What brand is it? Are you using another for your acid? Do you currently use liquid chlorine?
Click to expand...
I do use liquid chlorine now, the pump I got from Amazon so no brand name lol, it's just a 12v pump wth no timer built in, my only concern is the resistance of the stock tubing to chlorine, I'll see how it goes, I may have to replace it with a more chemically resistant tubing if it degrades too fast,
 
We have a similar device - works by convection . Ours is glazed also. Very common here. 3 of my neighbours have them too.

Ours is on the roof at an angle of about 40/45 and helps to heat up the water for our top floor bathrooms. It fills up the hot water tank (electric) to help reduce the electricity bills.
 
www.blue-white.com

Accessories - Blue-White Industries

Blue-White Industries offers a wide range of premium accessories to assist in the proper installation and operation of our manufactured products.
www.blue-white.com www.blue-white.com
IIRC, you want neoprene tube.
The pump should have a tube for the rollers that is designed for it. If this is not made for chlorine and acid, it will break, split, stick closed, or clog after a while. You can only get that tube from the manufacturer.
 
I still recommend you contact the manufacturer of your pump for chemical resistant pump tube. I am talking about the short tube that is inside the roller housing and in contact with the rollers. The tube going from the pump to the injector, and from the pump to the jug, is probably ok to use any of the tubing suggested. But if you use it in the pump itself you will have problems. In my experience, the rollers will move the tube through the pump if it is not equipped with the manufacturers tube with fittings that attach it to the roller housing and allow it to push liquid through the tube, not just push the tube out of the roller housing. I have seen them tear the tube in half just from an improper installation of the right tube. But I only worked in the business for 25 years and have only seen a few hundred of these, so don't take my word for it. You will learn the same as I did, by trying it out. At least you live there and will not have to make multiple trips to a distant location to discover that your attempt to make it work with regular tubing was a failure and you still have to find the right tube.
Best of luck. I hope it works out.
 

Enjoying this content?

Support TFP with a donation.

Give Support
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply