3 days ago I started turning on my SWG, water temp is consistently 64 and baseline salt level was 1900 ppm
Here's the problem.
3 days later, after adding 80lb of salt to the pool, the intellichlor reading is still.... 1900 ppm
On the SWG box, there's a red error light indicating low salt level.
I did a salt test with the Taylor K2006 and it gave me a reading of 3000 ppm
So obviously something is wrong with the SWG, and this thing is brand new and has never been used (pool was installed in November and it was too cold to use the SWG until recently)
Not sure what to do next.
Here's the problem.
3 days later, after adding 80lb of salt to the pool, the intellichlor reading is still.... 1900 ppm
On the SWG box, there's a red error light indicating low salt level.
I did a salt test with the Taylor K2006 and it gave me a reading of 3000 ppm
So obviously something is wrong with the SWG, and this thing is brand new and has never been used (pool was installed in November and it was too cold to use the SWG until recently)
Not sure what to do next.