Opened my pool exactly two weeks ago and water was dark green and very dirty due to multiple rips in my winter cover and a lot of organic material making its way in (long story).
I have run the filter non-stop 24/7 since then and water is much better....but still cloudy. I have swept, scrubbed, vacuumed and backwashed many, many times. Even brought my water to be tested at pool store twice after doing my own testing just to make sure my numbers were good (second trip there this week, they sold my wife an additional 3 bags of salt and clarifier, even though my salt is 3800. They suggested talking to their "chemist" if those two things didn't clear up the water).
My numbers seem ok:
Free Chlorine 3
CC .2
ph 7.7
CH 240
TA 100
CYA 60 (little low for salt water?)
Not sure if this has anything to do with it....but my control panel is throwing codes for air temp sensor and water temp sensor, which has been a problem since opening the pool. Will deal with that this week. Any help would be appreciated!
I have run the filter non-stop 24/7 since then and water is much better....but still cloudy. I have swept, scrubbed, vacuumed and backwashed many, many times. Even brought my water to be tested at pool store twice after doing my own testing just to make sure my numbers were good (second trip there this week, they sold my wife an additional 3 bags of salt and clarifier, even though my salt is 3800. They suggested talking to their "chemist" if those two things didn't clear up the water).
My numbers seem ok:
Free Chlorine 3
CC .2
ph 7.7
CH 240
TA 100
CYA 60 (little low for salt water?)
Not sure if this has anything to do with it....but my control panel is throwing codes for air temp sensor and water temp sensor, which has been a problem since opening the pool. Will deal with that this week. Any help would be appreciated!