Hayward Multiport SP0714g11m was working last season with filter along with new

[phillipjko]

I had everything new installed. Super pump, Hayward Multiport SP0714g11m, SWG, etcc. I attached everything, the pump was in recirculate mode. I filled the pump up to prime it and turn on the pump in recirculate mode. I fill water into the pump basket and it was taking in.... I think I made a mistake. I then turn it off after 15-20mins... realizing the mistake. I changed it to filter. The pump did not start or the filter was working. What can I do. When I turn on the power.. there is a thud sound in the Hayward Salt water generator control area.. it lights up but the pump could not start. There was nothing blown or fuse off as I could not get the pump or the filter to work after turning it clockwise from filter to backwash to rinse. etc. Advise.. pool as a result could not be recirculated

IMG_7669 | pectin232 | Flickr
IMG_7668 | pectin232 | Flickr
IMG_7675 | pectin232 | Flickr
IMG_7674 | pectin232 | Flickr
IMG_7673 | pectin232 | Flickr
IMG_7672 | pectin232 | Flickr
IMG_7671 | pectin232 | Flickr

 

[Texas Splash]

I fill water into the pump basket and it was taking in.... I think I made a mistake.

Maybe it's just me, but I'm having difficulty understanding exactly what happened within 15-20 minutes after you filled the pump basket with water and turned-on the system to prime. After filling the basket and securing the lid, what exactly happened? Did ti run dry for that long? Get hot? Running on circulate as opposed to filter shouldn't have effected it's ability to stay primed. So now there is no power or movement of the pump at all?

 

[phillipjko]

Maybe it's just me, but I'm having difficulty understanding exactly what happened within 15-20 minutes after you filled the pump basket with water and turned-on the system to prime. After filling the basket and securing the lid, what exactly happened? Did ti run dry for that long? Get hot? Running on circulate as opposed to filter shouldn't have effected it's ability to stay primed. So now there is no power or movement of the pump at all?

When I turn it on now..nothing happens.. It was warm to the touch but it should not be broken.. I think..that was yesterday.. have not tried today. I am at work now