Taylor Test Kit K2006-C or TF-100

Order a SpeedStir with your TF100 - you will not regret it - makes testing much easier.

Take care.
 
Get the sample sizer and an extra cylinder for it too, if you can swing it. Consistent & repeatable results. No measuring juet water in cylinder and sizer in same volume of water everytime.
 
Get the sample sizer and an extra cylinder for it too, if you can swing it. Consistent & repeatable results. No measuring juet water in cylinder and sizer in same volume of water everytime.

If get the SpeedStir you do not need the extra cylinder - it comes with it!
 
After having a Speed-Stir for two seasons I could not imagine being without it. The Sample Sizer is great as well, coupled with the Speed Stir, it keeps my test results very repeatable.
 

Enjoying this content?

Support TFP with a donation.

Give Support
I purchased a K-2006 last year and have been happy with it; however, if I were going to do it again I'd go with the TF-100 due to the 2oz R-0871 reagent (more than 2x that in the Taylor kit), the additional CYA reagent, and the OTO chlorine test if you're just looking to ballpark your levels to the nearest 1 ppm.

Better yet, become a TFP supporter and get a discount on the TF-100 from TFTestKits.net and it becomes an even greater value.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.