I have a filter that has a 2inch inlet/outlet; but confused as to my pipe size - if I am using 50mm pipe size is that a match for the 2 inch inlet or I should be using 63mm and that would be an exact match?
Filter and Pipe sizes
- Thread starter zaf
- Start date
- Jul 21, 2013
- 52,865
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
epco-plastics.com
a 2” (NB) tube has a 60.3mm od and is also known as 50mm N.B., but the metric equivalent is actually 63mm OD
epco-plastics.com
Plastic Pipe Sizes Chart | epco Plastics
Convert plastic pipe joint sizes from Inch to Metric or vice versa with our handy Plastic Pipe Sizes chart from epco UK.
epco-plastics.com
a 2” (NB) tube has a 60.3mm od and is also known as 50mm N.B., but the metric equivalent is actually 63mm OD
PVC Pipe Sizes | Inch and Metric | epco
epco provides pvc pipe dimensions including outer diameter, inner pipe diameter and wall thickness so that you can better choose the pipe that's right for your job.
epco-plastics.com
ok thanks for this so the metric equivalent for a 2inch fitting is 63mm, thanks for letting me know this, was going around in circles
Similar threads
