Please ignore the side drip as it was caused by an untightened bolt that has since been tightened.
Based on the video, what needs to be replaced on this Pentair Whisperflo pool pump to fix the leak?
- Thread starter Poolenthused
- Start date
- Jul 21, 2013
- 55,271
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Is this the same pump being discussed in...
www.troublefreepool.com
Pool return jet only emits bubbles. The pump is unable to suction water from the skimmer opening and into the filter.
Pool return jet only emits bubbles. The pump is unable to suction water from the skimmer opening and into the filter. If the filter cannot be filled then how can the air escape? Can a hose be used to push water through the skimmer opening and into the pump to thereby fill the filter? I checked...
www.troublefreepool.com
Yes, that problem was solved.Is this the same pump being discussed in...
Pool return jet only emits bubbles. The pump is unable to suction water from the skimmer opening and into the filter.
Pool return jet only emits bubbles. The pump is unable to suction water from the skimmer opening and into the filter. If the filter cannot be filled then how can the air escape? Can a hose be used to push water through the skimmer opening and into the pump to thereby fill the filter? I checked...
- Jul 21, 2013
- 55,271
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
It is helpful to people if you close out a thread explaining how you solved the problem and don't leave it open.
Similar threads
