salt chlorination cell

I had a surprise water test of zero free or total chlorine. All other water chemistry OK except for high stabilizer (100 ppm vs 60-80 desired range. Hayward Turbo cell 15 has normal voltages, current, temperature and salt measurements, and local pool store tested it with 2 passes on their...

New pool (completed May 2023). So all equipment is 3ish months old. Saw some white flakes coming out of the jets recently and figured the salt cell was dirty. We went out of town and my Father-In-Law who was caring for the pool turned off the Chlorinator (chlorine levels were HIGH). White...

Hi all, I want to redo the pipe setup for my "new to me" pool. Last year was year 1 and I replaced anything that was broken 1:1; i.e. Hayward Heater bombed, Hayward salt 'n' swim controller and cell bombed, and the sacrificial anode hadn't been changed since 2013. Honestly, the heater and salt...

Hey all, Just spent 3 days in a salt water pool resort. Normally I get eczema after a few hours in my pool. Takes a week to resolve. My skin is great after 3 solid days in multiple pools at this salt water resort. I’m curious if I can install a salt water cell for our pool. How does...

My Pentair Intellichlor IC40 is pretty old. It's bulging and has some minor cracks and seems completely dead (no lights) I changed the fuse 10 amp, power came back for two seconds and smoke came out of unit. I'm guessing it is completely dead? If so should I be good to just swap it with a new...

Leslie's Sold me a Swimpure Extreme 40. Unfortunately for me, I didn't do my homework and didn't know the system was designed for pools "Up to 40,000 gallons". The problem is my pool is barely 8,000 gallons, and I am having trouble keeping the chlorine levels down. It started with a setting...

Hi, I rebuilt a hot tub over the summer, about 130 gallons, perfect for us and our space. I realize I have to be extra careful with the chemistry due to the size. Reading tons of articles here and posts. My question is this, as I'm going to get a drop test kit and get my TA inline...What affect...

Hello This is my first year with my saltwater pool with a chlorine generator and a PH dosing pump. I am experimenting with chlorine, pH, TA levels. I think I am getting better at it. My pool is an overflow type, roughly 24,000 gallons, outdoor private usage in summer with plenty of sunlight...

HI! I'm opening my pool right now. Water is clear after removing my winter cover! Yay! Okay. Last year, it was a liquid chlorine pool. This year, I'm currently installing an SWG. Do I need to shock the pool first before adding my salt and turning on the SWG? Or, could I add the salt, set my...

Hello pros. First post. Quick run down: Pool is small 9000 gal Heated Salt Hayward T-3 cell Hayward Aquarite panel Age unknown I noticed the water was starting to green a bit. Heavy Texas sun and Tropical Storm Nicholas seems to have diluted the water. Did a quick taste test and no salt...

Hi Everyone, I'm brand new to pool ownership and we noticed that when we opened the pool for the first time, there were these black stains scattered around the bottom and sides of the pool. The pool is a salt water pool and has a vinyl liner about 7-8 years old (I've been told). The previous...

Hi All, we had our in cround 17000gal pool resurfaced with marquis pool finish and added a salt chlorinator system (iChlor 30). We did the recommended everyday brushing for 30 days as well as kept up with the contractor recommended pool chemistry through our local Leslie's water tests and...

Hey, could you advice how is done functionally this connection, redline marked on the attachment? How is current sense working with R7 resistance and how is R7 connected in circuit? How is pin 6 of J5 socket connected to R9/R12 resistance and how is working with TH Sense? (meaning of TH Sense?)...